A Study on the compensation margin on butt welding joint of Large Steel plates during Shipbuilding construction. Issue 1 (September 2015)

• Record Type: Journal Article
• Authors: Kim, J; Jeong, H; Ji, M; Jeong, K; Yun, C; Lee, J; Chung, H
• Is Part Of: IOP conference series. Volume 88:Issue 1(2015)
• Publication Date: 2015-09
• Subjects: Materials science -- Periodicals; 620.1105
• DOI: 10.1088/1757-899X/88/1/012040
• Languages: English
• ISSNs: 1757-8981

Abstract

Abstract: This paper examines the characteristics of butt welding joint shrinkage for shipbuilding and marine structures main plate. The shrinkage strain of butt welding joint which is caused by the process of heat input and cooling, results in the difference between dimensions of the actual parent metal and the dimensions of design. This, in turn, leads to poor quality in the production of ship blocks and reworking through period of correction brings about impediment on improvement of productivity. Through experiments on butt welding joint's shrinkage strain on large structures main plate, the deformation of welding residual stress in the form of I, Y, V was obtained. In addition, the results of experiments indicate that there is limited range of shrinkage in the range of 1 ∼ 2 mm in 11t ∼ 21.5t thickness and the effect of heat transfer of weld appears to be limited within 1000 mm based on one side of seam line so there was limited impact of weight of parent metal on the shrinkage. Finally, it has been learned that Shrinkage margin needs to be applied differently based on groove phenomenon in the design phase in order to minimize shrinkage.