Cohesive zone simulation of grain size and misorientation effects on hydrogen embrittlement in nickel. (November 2017)

• Record Type: Journal Article
• Authors: Yu, Haiyang; Olsen, Jim Stian; Olden, Vigdis; Alvaro, Antonio; He, Jianying; Zhang, Zhiliang
• Is Part Of: Engineering failure analysis. Volume 81(2017)
• Page Start: 79
• Page End: 93
• Publication Date: 2017-11
• Subjects: Hydrogen embrittlement -- Grain misorientation -- Cohesive zone modeling -- Size effect; System failures (Engineering) -- Periodicals; Fracture mechanics -- Periodicals; Reliability (Engineering) -- Periodicals; Pannes -- Périodiques; Rupture, Mécanique de la -- Périodiques; Fiabilité -- Périodiques; Fracture mechanics; Reliability (Engineering); System failures (Engineering); Periodicals; Electronic journals; 620.112
• DOI: 10.1016/j.engfailanal.2017.07.027
• Languages: English
• ISSNs: 1350-6307

Abstract

Abstract: The size and misorientation effects on hydrogen embrittlement of a four grain nickel aggregate are studied with the help of hydrogen informed cohesive zone model. The grain misorientation angle is parameterized by fixing the lower grains while rotating the upper grains about the out-of-plane axis. Brittle failure of the grain aggregate is observed and nominal strength obtained. In the crack-free situation, the grain misorientation exerts an obvious weakening effect on the nominal strength, which is most pronounced at misorientation angles around 20°. Such trend applies to the pre-cracked situation but is much less pronounced. Both misorientation and pre-crack lead to size effect. The nominal strength shows a decreasing trend with the grain size, indicating that grain refinement tends to improve the load bearing capacity, which coincides with the observation in practice. Further, it is shown that the size effect diagram without hydrogen can be divided into three regimes. The conclusions apply to the case with hydrogen, except that the trend of the size effect curve can be affected by large grain sizes due to the longer absolute distance of hydrogen diffusion. These results provide guidelines for grain boundary engineering and for nanomechanical tests aiming at calibrating the intergranular decohesion parameters. Highlights: A specimen geometry independent hydrogen degradation law is proposed. The calibration procedure based on conventional tensile tests is established. Hydrogen informed cohesive zone modeling is performed in constant loading scenarios. The effects of strain rate and cold creep on the hydrogen degradation law are discussed.