Mechanical Behavior of a Partially Encased Composite Girder with Corrugated Steel Web: Interaction of Shear and Bending. (December 2017)

• Record Type: Journal Article
• Authors: He, Jun; Wang, Sihao; Liu, Yuqing; Lyu, Zhan; Li, Chuanxi
• Is Part Of: Engineering. Volume 3:Number 6(2017)
• Page Start: 806
• Page End: 816
• Publication Date: 2017-12
• Subjects: Encased concrete -- Composite girder -- Corrugated steel web -- Interaction of shear and bending; Engineering -- Periodicals; Engineering -- China -- Periodicals; 620.005
• DOI: 10.1016/j.eng.2017.11.005
• Languages: English
• ISSNs: 2095-8099

Abstract

Abstract: The synergistic use of partially encased concrete and composite girders with corrugated steel webs (CGCSWs) has been proposed to avoid the buckling of corrugated steel webs and compression steel flanges under large combined shear force and bending moment in the hogging area. First, model tests were carried out on two specimens with different shear spans to investigate the mechanical behavior, including the load-carrying capacity, failure modes, flexural and shear stress distribution, and development of concrete cracking. Experimental results show that the interaction of shear force and bending moment causes the failure of specimens. The bending-to-shear ratio does not affect the shear stiffness of a composite girder in the elastic stage when concrete cracking does not exist, but significantly influences the shear stiffness after concrete cracking. In addition, composite sections in the elastic stage satisfy the assumption of the plane section under combined shear force and bending moment. However, after concrete cracking in the tension field, the normal stresses of a corrugated web in the tension area become small due to the "accordion effect, " with almost zero stress at the flat panels but recognizable stress at the inclined panels. Second, three-dimensional finite-element (FE) models considering material and geometric nonlinearity were built and validated by experiments, and parametric analyses were conducted on composite girders with different lengths and heights to determine their load-carrying capacity when subjected to combined loads. Finally, an interaction formula with respect to shear and flexural strength is offered on the basis of experimental and numerical results in order to evaluate the load-carrying capacity of such composite structures, thereby providing a reference for the design of partially encased composite girders with corrugated steel webs (PECGCSWs) under combined flexural and shear loads.