Characterization of anisotropic pores and spatially oriented precipitates in sintered Mo‐base alloys using small‐angle neutron scattering. Issue 6 (28th November 2018) - Karge, Lukas
Abstract : The present work reports a method for treating the anisotropic small‐angle scattering from sintered Mo‐base materials. The method yields the morphology and quantity of uniaxially deformed sinter pores and of aligned anisotropic precipitates. Abstract : Small‐angle neutron scattering (SANS) is a powerful method for the characterization of materials in the mesoscopic size range. For example, the method can be used to investigate the precipitation mechanisms in powder metallurgically processed materials. As a result of the processing route, the alloy matrix is usually heavily textured. If precipitates have an orientation relationship to the alloy matrix, they can produce an anisotropic scattering pattern showing streaks. The scattering is superimposed by a background with ellipsoidal shape, originating from deformed large‐scale structures. The evaluation of such data quickly becomes elaborate and a quantitative analysis of precipitation is difficult. The present work reports a method for treating the anisotropic scattering from such samples. A systematic study of the ellipsoidal background reveals that it originates from uniaxially deformed sinter pores. Irrespective of the degree of deformation during the processing route, SANS shows that sinter pores remain present in the matrix, and their morphology and relative volume fractions are determined. Consequently, their scattering signal can be subtracted to reveal the scattering from aligned precipitates. The method is demonstrated on powder metallurgically produced pure Mo and an Mo–Hf–C alloy.