LES of primary breakup of pulsed liquid jet in supersonic crossflow. (January 2019)

• Record Type: Journal Article
• Authors: Zhu, Y.H.; Xiao, F.; Li, Q.L.; Mo, R.; Li, C.; Lin, S.
• Is Part Of: Acta astronautica. Volume 154(2019)
• Page Start: 119
• Page End: 132
• Publication Date: 2019-01
• Subjects: Pulsed liquid jet -- Primary breakup -- Supersonic crossflow -- Interface tracking -- Large eddy simulation; Astronautics -- Periodicals; Outer space -- Exploration -- Periodicals; Astronautics; Periodicals; 629.405
• DOI: 10.1016/j.actaastro.2018.10.043
• Languages: English
• ISSNs: 0094-5765

Abstract

Abstract: The injection of a pulsed liquid jet into supersonic air flow is a promising approach to improving the fuel atomization performance in a Scramjet engine. Therefore, the primary breakup of a pulsed liquid jet in supersonic crossflow is numerically investigated in the present paper. A two-phase flow Large Eddy Simulation (LES) algorithm is developed for simulations of liquid jet atomization in supersonic gas flow. A coupled Level Set and Volume of Fluid (VOF) method is used to track the interface deformation and disintegration. The supersonic gas flow is solved using a compressible flow solver while the liquid phase is solved by an incompressible flow solver. Appropriate boundary conditions are specified at the interface for both solvers to correctly capture the interaction between the gas and liquid phases. The primary atomization of a steady liquid jet with the same average mass flow rate as the pulsed jet is also simulated as a benchmark test case. The liquid velocity pulsation produces a very different primary atomization morphology in comparison with the steady liquid jet, which significantly enhances the primary breakup process. It is observed that Rayleigh-Taylor instability dominates the development of surface waves for the steady liquid jet. For the pulsed liquid jet, the liquid column deformation induced by the liquid velocity pulsation determines the wavelength of the surface waves and thus the liquid jet breakup location. In comparison with the steady liquid jet, the penetration of the pulsed liquid jet increases by 20%, and the width of the wake zone expands by 25%, resulting in improved atomization and mixing performance. Highlights: Primary breakup of pulsed liquid jet in supersonic crossflow is well predicted by LES. Surface waves of the liquid column are dominated by liquid jet pulsation. Liquid jet pulsation improves the atomization and mixing performance.