CFD-based shape optimisation of a CO2 two-phase ejector mixing section. (25th February 2016)

• Record Type: Journal Article
• Authors: Palacz, Michal; Smolka, Jacek; Kus, Waclaw; Fic, Adam; Bulinski, Zbigniew; Nowak, Andrzej J.; Banasiak, Krzysztof; Hafner, Armin
• Is Part Of: Applied thermal engineering. Volume 95(2016:Feb.)
• Page Start: 62
• Page End: 69
• Publication Date: 2016-02-25
• Subjects: CO2 ejector -- Ejector performance -- Ejector optimisation -- Homogeneous equilibrium model -- CFD modelling -- Shape optimisation; Heat engineering -- Periodicals; Heating -- Equipment and supplies -- Periodicals; Periodicals; 621.40205
• DOI: 10.1016/j.applthermaleng.2015.11.012
• Languages: English
• ISSNs: 1359-4311

Abstract

Highlights: The CFD-based shape of the ejector mixing section is presented. The efficient computational tool was used for the optimisation. The mixer diameter has the most significant influence on the ejector efficiency. Presented methodology can be used as the ejector design tool. Abstract: In this study, the geometry of a CO2 ejector mixing section was optimised. Two optimisation algorithms, a genetic algorithm (GA) and an evolutionary algorithm (EA), were used with a validated CFD model based on the homogeneous equilibrium model (HEM). The ejector was designed to increase the Coefficient of Performance (COP) of CO2 refrigeration systems used in supermarkets. Hence, the objective function (OF) for the optimisation was defined as the ejector efficiency for various refrigeration system loads, which determined the ejector operating conditions (OCs). The optimisation results showed a very strong relation between ejector performance and the mixer diameter. Similar results were obtained with both optimisation algorithms. In each case, the mixer diameter was nearly equal to that of the baseline; however, the length of the mixing section was greater in the optimal design. The ejector efficiency of the optimised design was as much as 2% higher than that of the baseline design.