Development of mortars containing superabsorbent polymer. (1st October 2015)

• Record Type: Journal Article
• Authors: Senff, L.; Modolo, R.C.E.; Ascensão, G.; Hotza, D.; Ferreira, V.M.; Labrincha, J.A.
• Is Part Of: Construction & building materials. Volume 95(2015)
• Page Start: 575
• Page End: 584
• Publication Date: 2015-10-01
• Subjects: Superabsorbent polymer -- Rheology -- Flow table -- Mortar; Building materials -- Periodicals; 624.18
• DOI: 10.1016/j.conbuildmat.2015.07.173
• Languages: English
• ISSNs: 0950-0618

Abstract

Highlights: DoE was used to formulate mortars with superabsorbent polymer. The use of rheometer can play a relevant role on the hardened properties. Mortars with similar initial yield stress diverged over time. Mortars containing SA increased the MBV regarding the reference sample. Abstract: The rheological behavior of mortars containing different dosages of superabsorbent polymer (SAP) and distinct water/binder (W/B) ratios was measured. In addition, mechanical properties, capillary index and porosity of samples with 0–0.9 wt.% SAP and 0.66–0.82 water/binder weight ratios were also evaluated at 28 days, using design of experiments (DoE). In general, the yield stress was the rheological parameter that better expressed the continuous absorption of water molecules persistence once the mechanical mixing was concluded. Spread on table and yield stress exhibited an opposite relationship described by a power correlation. Despite being prepared with additional water dosages, SAP-containing mortars showed a capillary index below those estimated for SAP-free mortars, while the flexural strength results remained invariable. As expected, SAP increased up to 18% the moisture buffering capacity of the mortar, when compared to the reference sample (0 wt.% SAP).