Parametric study of friction stir welding induced distortion in thin aluminium alloy plates: A coupled numerical and experimental analysis. (January 2019)

• Record Type: Journal Article
• Authors: Costa, M.I.; Leitão, C.; Rodrigues, D.M.
• Is Part Of: Thin-walled structures. Volume 134(2019)
• Page Start: 268
• Page End: 276
• Publication Date: 2019-01
• Subjects: FSW -- Thin plates -- Welding distortion -- Residual stresses -- DIC -- FEA; Thin-walled structures -- Periodicals; 690.1
• DOI: 10.1016/j.tws.2018.10.027
• Languages: English
• ISSNs: 0263-8231

Abstract

Abstract: Welding distortion and residual stresses in Friction Stir Welding (FSW) of thin AA5754-H22 aluminium plates were analysed. An experimental work was conducted concerning the influence of plates' dimensions, process parameters and welding procedures on friction stir welding induced distortion. Plates' distortion was evaluated using Digital Image Correlation (DIC). The experimental work was complemented by a fully coupled thermo-mechanical Finite Element Analysis (FEA). The numerical results enabled to correlate the distortion modes observed experimentally with the residual stresses distribution in the welds. It was observed that both the distortion magnitude and mode, as well as the longitudinal residual stresses, are strongly influenced by plates width and thickness. Nor the realising sequence, nor the cooling time after welding, have a strong influence on plates' distortion and residual stresses. The numerical results also indicate that using ultra high welding speeds enables to suppress distortion in thin plates welding. Graphical abstract: Highlights: The tool stirring action had no influence on plates distortion. Heat generation increased slightly when increasing the ω/v ratio. The buckling mode changed when changing plates' dimensions. Plates' width had higher influence on distortion than plates' length. Plates releasing conditions had no influence on distortion.