Influences of granular constraints and surface effects on the heterogeneity of elastic, superelastic, and plastic responses of polycrystalline shape memory alloys. (May 2017)

• Record Type: Journal Article
• Authors: Paranjape, Harshad M.; Paul, Partha P.; Sharma, Hemant; Kenesei, Peter; Park, Jun-Sang; Duerig, T.W.; Brinson, L. Catherine; Stebner, Aaron P.
• Is Part Of: Journal of the mechanics and physics of solids. Volume 102(2017:May)
• Page Start: 46
• Page End: 66
• Publication Date: 2017-05
• Subjects: Phase transformation (A) -- Microstructures (A) -- Polycrystalline material (B) -- Finite elements (C) -- X-ray diffraction; Mechanics, Applied -- Periodicals; Solids -- Periodicals; Mechanics -- Periodicals; Mécanique appliquée -- Périodiques; Solides -- Périodiques; Mechanics, Applied; Solids; Periodicals; 531.05
• DOI: 10.1016/j.jmps.2017.02.007
• Languages: English
• ISSNs: 0022-5096

Abstract

Abstract: Deformation heterogeneities at the microstructural length-scale developed in polycrystalline shape memory alloys (SMAs) during superelastic loading are studied using both experiments and simulations. In situ X-ray diffraction, specifically the far-field high energy diffraction microscopy (ff-HEDM) technique, was used to non-destructively measure the grain-averaged statistics of position, crystal orientation, elastic strain tensor, and volume for hundreds of austenite grains in a superelastically loaded nickel-titanium (NiTi) SMA. These experimental data were also used to create a synthetic microstructure within a finite element model. The development of intragranular stresses were then simulated during tensile loading of the model using anisotropic elasticity. Driving forces for phase transformation and slip were calculated from these stresses. The grain-average responses of individual austenite crystals examined before and after multiple stress-induced transformation events showed that grains in the specimen interior carry more axial stress than the surface grains as the superelastic response "shakes down". Examination of the heterogeneity within individual grains showed that regions near grain boundaries exhibit larger stress variation compared to the grain interiors. This intragranular heterogeneity is more strongly driven by the constraints of neighboring grains than the initial stress state and orientation of the individual grains.