Fast four-dimensional tensile test monitored via X-ray computed tomography: Single projection–based digital volume correlation dedicated to slender samples. (October 2018)

• Record Type: Journal Article
• Authors: Jailin, Clément; Buljac, Ante; Bouterf, Amine; Hild, François; Roux, Stéphane
• Is Part Of: Journal of strain analysis for engineering design. Volume 53:Number 7(2018)
• Page Start: 473
• Page End: 484
• Publication Date: 2018-10
• Subjects: Four-dimensional measurements -- digital volume correlation -- in situ test -- model reduction -- tomography; Strains and stresses -- Periodicals; Strain gages -- Periodicals; 624.176
• DOI: 10.1177/0309324718797765
• Languages: English
• ISSNs: 0309-3247

Abstract

The measurement of four-dimensional (i.e. three-dimensional space and time) displacement fields of in situ tests within X-ray computed tomography scanners (i.e. lab-scale X-ray computed tomography) is considered herein using projection-based digital volume correlation. With a single projection per loading (i.e. time) step, the developed method allows the loading not to be interrupted and to vary continuously during the scan rotation. As a result, huge gains in acquisition time (i.e. more than two orders of magnitude) need to be reached. The kinematic analysis is carried out using predefined space and time bases combined with model reduction techniques (i.e. proper generalized decomposition with space–time decomposition). The accuracy of the measured kinematic basis is assessed via gray-level residual fields. An application to an in situ tensile test composed of 127 time steps is performed. Because of the slender geometry of the sample, a specific beam space regularization is used, which is composed of a stack of rigid sections. Large improvements on the residual, the signal-to-noise ratio of which evolves from 9.9 to 26.7 dB, validate the procedure.