Onset of flame-intrinsic thermoacoustic instabilities in partially premixed turbulent combustors. (September 2018)

• Record Type: Journal Article
• Authors: Murugesan, Meenatchidevi; Singaravelu, Balasubramanian; Kushwaha, Abhijit K; Mariappan, Sathesh
• Is Part Of: International journal of spray and combustion dynamics. Volume 10:Number 3(2018)
• Page Start: 171
• Page End: 184
• Publication Date: 2018-09
• Subjects: Flame-intrinsic thermoacoustic instabilities -- intermittency -- partially premixed flames; Combustion engineering -- Periodicals; Fluid dynamics -- Periodicals; Combustion -- Periodicals; Spraying -- Periodicals; Combustion; Combustion engineering; Fluid dynamics; Spraying; Periodicals; 541.361
• DOI: 10.1177/1756827718758511
• Languages: English
• ISSNs: 1756-8285

Abstract

We investigate the onset of thermoacoustic instabilities in a turbulent combustor terminated with an area contraction. Flow speed is varied in a swirl-stabilized, partially premixed combustor and the system is observed to undergo a dynamical transition from combustion noise to instability via intermittency. We find that the frequency of thermoacoustic oscillations does not lock-on to any of the acoustic modes. Instead, we observe that the dominant mode in the dynamics of combustion noise, intermittency and thermoacoustic instability is a function of the flow speed. We also find that the observed mode is insensitive to the changes in acoustic field of the combustor, but it varies as a function of upstream flow time scale. This new kind of thermoacoustic instability was independently discovered in the recent theoretical analysis of premixed flames. They are known as intrinsic thermoacoustic modes. In this paper, we report the experimental observation and the route to flame intrinsic thermoacoustic instabilities in partially premixed flame combustors. A simplified low-order network model analysis is performed to examine the driving mechanism. Frequencies predicted by the network model analysis match well with the experimentally observed dominant frequencies. Intrinsic flame-acoustic coupling between the unsteady heat release rate and equivalence ratio fluctuations occurring at the location of fuel injection is found to play a key role. Further, we observe intrinsic thermoacoustic modes to occur only when the acoustic reflection co-efficients at the exit are low. This result indicates that thermoacoustic systems with increased acoustic losses at the boundaries have to consider the possibility of flame intrinsic thermoacoustic oscillations.