An experimental study of the optimal design parameters of a wind power tower used to improve the performance of vertical axis wind turbines. (September 2018)

• Record Type: Journal Article
• Authors: Cho, Soo-Yong; Choi, Sang-Kyu; Kim, Jin-Gyun; Cho, Chong-Hyun
• Is Part Of: Advances in mechanical engineering. Volume 10:Number 9(2018)
• Publication Date: 2018-09
• Subjects: Wind power tower -- performance augment -- vertical axis wind turbine -- wind tunnel -- design parameter; Mechanical engineering -- Periodicals; 621.05
• DOI: 10.1177/1687814018799543
• Languages: English
• ISSNs: 1687-8132

Abstract

In order to augment the performance of vertical axis wind turbines, wind power towers have been used because they increase the frontal area. Typically, the wind power tower is installed as a circular column around a vertical axis wind turbine because the vertical axis wind turbine should be operated in an omnidirectional wind. As a result, the performance of the vertical axis wind turbine depends on the design parameters of the wind power tower. An experimental study was conducted in a wind tunnel to investigate the optimal design parameters of the wind power tower. Three different sizes of guide walls were applied to test with various wind power tower design parameters. The tested vertical axis wind turbine consisted of three blades of the NACA0018 profile and its solidity was 0.5. In order to simulate the operation in omnidirectional winds, the wind power tower was fabricated to be rotated. The performance of the vertical axis wind turbine was severely varied depending on the azimuthal location of the wind power tower. Comparison of the performance of the vertical axis wind turbine was performed based on the power coefficient obtained by averaging for the one periodic azimuth angle. The optimal design parameters were estimated using the results obtained under equal experimental conditions. When the non-dimensional inner gap was 0.3, the performance of the vertical axis wind turbine was better than any other gaps.