Design and fabrication of a metal core PVDF fiber for an air flow sensor. (28th August 2015)

• Record Type: Journal Article
• Authors: Bian, Yixiang; Liu, Rongrong; Huang, Xiaomei; Hong, Jin; Huang, Huiyu; Hui, Shen
• Is Part Of: Smart materials and structures. Volume 24:Number 10(2015:Oct.)
• Publication Date: 2015-08-28
• Subjects: piezoelectric fiber -- airflow sensor -- biomimetics -- directional response -- hair sensor -- poly (vinylidene fluoride) -- metal core; Smart materials -- Periodicals; Strucural design -- Periodicals; 620.11
• DOI: 10.1088/0964-1726/24/10/105001
• Languages: English
• ISSNs: 0964-1726

Abstract

Abstract: To track prey or avoid predators, many arthropods can detect variations in airflow and pressure gradients using an array of very thin and sensitive filiform hairs. In this study, metal core piezoelectric poly(vinylidene fluoride) (PVDF) fibers were prepared to mimic such hair sensors. The flexibility of the fibers was very good, which was helpful for overcoming the typical brittleness of piezoelectric ceramic fibers. At the same time, the diameter of the fibers was very small (down to 50 μ m in diameter). In order to mimic the insects' hairs to the maximum extent, which was expected to greatly improve the sensitivity of such PVDF fiber-based sensors, a feasible process to prepare and extract electrodes on the surface of the fibers had to be developed. Compared with stainless steel filament-core fibers, the molybdenum filament-core PVDF fibers were easy to stretch. The molybdenum filament was then covered by a cylindrical PVDF layer with a diameter of 400 μ m. One half of the longitudinal surface of the fibers was spray-coated with a conductive silver adhesive. The metal core was then used as one electrode, and the conductive silver adhesive was used as the other electrode. After polarization, a single metal-core PVDF fiber could be used as an airflow sensor. The surface structure and the sections of the PVDF fiber were analyzed by scanning electron microscopy. The results of the mechanical stretching tests showed that the metal core greatly enhanced the mechanical properties of the PVDF fibers. X-ray diffraction revealed that the greater the stretching ratio, the higher the α -to- β -phase conversion rate during the preparation of the PVDF fibers. A single metal-core PVDF fiber was used as a bionic airflow sensor, and a mechanical model of this sensor was derived. The airflow sensing capability of the PVDF fiber was experimentally confirmed in a miniature wind tunnel. The results showed that a cantilevered metal-core PVDF fiber is capable of detecting the range and direction of the surrounding airflow variations. The experimental results also verified the theoretical model.