Lubrication and frictional analysis of cam–roller follower mechanisms. (March 2018)

• Record Type: Journal Article
• Authors: Alakhramsing, Shivam S; de Rooij, Matthijn; Schipper, Dirk Jan; van Drogen, Mark
• Is Part Of: Proceedings of the Institution of Mechanical Engineers. Volume 232:Number 3(2018:Mar.)
• Page Start: 347
• Page End: 363
• Publication Date: 2018-03
• Subjects: EHL -- cam–roller -- finite line contacts -- roller slippage; Tribology -- Periodicals; 621.89
• DOI: 10.1177/1350650117718083
• Languages: English
• ISSNs: 1350-6501

Abstract

In this work, a full numerical solution to the cam–roller follower-lubricated contact is provided. The general framework of this model is based on a model describing the kinematics, a finite length line contact isothermal-EHL model for the cam–roller contact and a semi-analytical lubrication model for the roller–pin bearing. These models are interlinked via an improved roller–pin friction model. For the numerical study, a cam–roller follower pair, as part of the fuel injection system in Diesel engines, was analyzed. The results, including the evolution of power losses, minimum film thickness and maximum pressures, are compared with analytical solutions corresponding to infinite line contact models. The main findings of this work are that for accurate prediction of crucial performance indicators such as minimum film thickness, maximum pressure and power losses a finite length line contact analysis is necessary due to non-typical EHL characteristics of the pressure and film thickness distributions. Furthermore, due to the high contact forces associated with cam–roller pairs as part of fuel injection units, rolling friction is the dominant power loss contributor as roller slippage appears to be negligible. Finally, the influence of the different roller axial surface profiles on minimum film thickness, maximum pressure and power loss is shown to be significant. In fact, due to larger contact area, the maximum pressure can be reduced and the minimum film thickness can be increased significantly, however, at the cost of higher power losses.