Effect of casing aspiration on the tip leakage flow in the axial flow compressor cascade. (May 2018)

• Record Type: Journal Article
• Authors: Mao, Xiaochen; Liu, Bo; Tang, Tianquan
• Is Part Of: Proceedings of the Institution of Mechanical Engineers. Volume 232:Number 3(2018)
• Page Start: 225
• Page End: 239
• Publication Date: 2018-05
• Subjects: Casing aspiration -- tip leakage vortex -- active flow control -- axial compressor cascade; Mechanical engineering -- Periodicals; Power (Mechanics) -- Periodicals; Production engineering -- Periodicals; 621
• DOI: 10.1177/0957650917724598
• Languages: English
• ISSNs: 0957-6509

Abstract

Tip leakage flow is usually responsible for the deterioration of compressor performance and stability. The current paper conducts numerical simulations on the impact of casing aspiration on the axial compressor cascade performance. Three aspiration schemes with different chordwise coverage are studied and analyzed. It is found that the cascade performance can be effectively improved by the appropriate casing aspiration, and the optimum aspiration scheme should cover the area including the onset point of tip leakage vortex and its vicinity. The control mechanisms are different for the aspiration schemes located at different blade chord ranges. For the aspiration scheme covering the onset point of tip leakage vortex, the improvement of the cascade performance is mainly due to that the starting point of the tip leakage vortex is shifted downstream. The original tip leakage vortex structure is divided into two parts if the aspiration scheme is located behind the onset point of tip leakage vortex and the final control effect is the combination of the influence from the two different parts of tip leakage vortex. Additionally, the casing aspiration redistributes the blade loading along the chord near blade tip. The results of these investigations may offer guidance for the appropriate design of aspiration scheme in the future updated compressors and the overall total pressure loss coefficient caused by aspiration slot should be considered in the design process.