An approach for functionally graded cladding of composite material on austenitic stainless steel substrate through microwave heating. (February 2018)

• Record Type: Journal Article
• Authors: Kaushal, Sarbjeet; Gupta, Dheeraj; Bhowmick, Hiralal
• Is Part Of: Journal of composite materials. Volume 52:Number 3(2018)
• Page Start: 301
• Page End: 312
• Publication Date: 2018-02
• Subjects: Microwave hybrid heating -- composite material -- functionally graded cladding -- characterization; Composite materials -- Periodicals; Composites -- Périodiques; 620.118
• DOI: 10.1177/0021998317705977
• Languages: English
• ISSNs: 0021-9983

Abstract

In the present work, functionally graded clads of Ni-SiC material have been developed on austenitic stainless steel (SS-304) substrate through 2.45 GHZ domestic microwave applicator. The functionally graded clads were processed by the concept of hybrid heating with varying exposed microwave power levels from 180 to 900 W. The optimum exposure time of 900 W microwave power was varied with compositional gradient and it is from 300 s to 420 s. The maximum thickness achieved for functionally graded clads was 2 mm at optimum exposure power and time. The microstructural analysis of developed clads reveals that the partial mutual diffusion between each successive layer took place and it confirms the metallurgical bonding in between. The typical flower like structure of Ni-matrix has been observed in clads where the SiC particles were uniformly dispersed. The maximum functionally graded clads micro-hardness of 1020 ± 30 HV were achieved.