Heat Generation on Implant Surface During Abutment Preparation at Different Elapsed Time Intervals. Issue 5 (October 2017)

• Record Type: Journal Article
• Authors: Al-Keraidis, Abdullah; Aleisa, Khalil; Al-Dwairi, Ziad Nawaf; Al-Tahawi, Hamdi; Hsu, Ming-Lun; Lynch, Edward; Özcan, Mutlu
• Is Part Of: Implant dentistry. Volume 26:Issue 5(2017:Oct.)
• Publication Date: 2017-10
• Subjects: titanium-alloy -- water bath -- thermocouple; Dental implants -- Periodicals; 617.69305
• DOI: 10.1097/ID.0000000000000600
• Languages: English
• ISSNs: 1056-6163

Abstract

Abstract : Purpose: The purpose of this study was to evaluate heat generation at the implant surface caused by abutment preparation using a diamond bur in a high-speed dental turbine in vitro at 2 different water-coolant temperatures. Materials and Methods: Thirty-two titanium-alloy abutments were connected to a titanium-alloy implant embedded in an acrylic resin placed within a water bath at a controlled temperature of 37°C. The specimens were equally distributed into 2 groups (16 each). Group 1: the temperature was maintained at 20 ± 1°C; and group 2: the temperature was maintained at 32 ± 1°C. Each abutment was prepared in the axial plane for 1 minute and in the occlusal plane for 1 minute. The temperature of the heat generated from abutment preparation was recorded and measured at 3 distinct time intervals. Results: Water-coolant temperature (20°C vs 32°C) had a statistically significant effect on the implant's temperature change during preparation of the abutment (P < 0.0001). Conclusion: The use of water-coolant temperature of 20 ± 1°C during preparation of the implant abutment decreased the temperature recorded at the implant surface to 34.46°C, whereas the coolant temperature of 32 ± 1°C increased the implant surface temperature to 40.94°C.