Structural integrity assessment of H2S storage tanks using acoustic emission and ultrasonic techniques. Issue 1 (2nd February 2015)

• Record Type: Journal Article
• Authors: Mukhopadhyay, C. K.; Haneef, T.K.; Jayakumar, T.; Sharma, G.K.; Rao, B.P.C.
• Is Part Of: International journal of structural integrity. Volume 6:Issue 1(2015)
• Page Start: 73
• Page End: 89
• Publication Date: 2015-02-02
• Subjects: Structural integrity -- Ultrasonic -- Nondestructive evaluation -- Acoustic emission -- Hydro test -- Storage tank; Structural engineering -- Research -- Periodicals; 620.11205
• DOI: 10.1108/IJSI-11-2013-0045
• Languages: English
• ISSNs: 1757-9864

Abstract

Abstract : Purpose: – The purpose of this paper is to present the results of acoustic emission (AE) and ultrasonic inspection of two H2 S storage tanks carried out in a heavy water plant, in order to characterize point type defects observed during earlier ultrasonic inspection and to ensure that these defects are not growing during hydrotesting of the tanks. Design/methodology/approach: – Using multiple AE sensors and AE source location methodology, the entire tank could be covered to detect and locate any dynamic sources of AE associated with local plastic deformation and/or growing discontinuities from any part of the tank during the hydrotest. For confirmation of the results obtained by AE, ultrasonic inspection on the tanks and on virgin plates from which the tanks were manufactured, were carried out. Findings: – The AE signals generated during first pressurisation are attributed to the micro yielding of the material of the tanks. A few scattered AE events were observed at a few locations during the hydrotesting of the tanks and these are due to structural and rubbing noise. During hold periods and repressurising cycle of the hydrotesting, no detectable AE events were observed and this confirmed the absence of any growing discontinuity in the tanks during the hydrotesting. Ultrasonic inspection on the tanks and on virgin plates confirmed that the point type defects detected are manufacturing defects and not formed during service life. Practical implications: – The combined results from AE and ultrasonic techniques confirmed the structural integrity of the tanks and ensured their healthiness for continued operation. Originality/value: – The paper brings out the use of AE and ultrasonic techniques for monitoring hydrotesting of storage tanks of a heavy water plant. The storage tanks where point type defect indications were reported during previous ultrasonic inspection and whether these defects are growing during hydrotesting of the tanks or not, were required to be known before the tanks are put in to further service. AE signals collected during pressurising and repressurising cycles of the hydrotest and subsequent inspection by ultrasonic confirmed the vessels to be free from growing defects during the hydrotest and provided baseline data for future inspection.