Design and analysis of a 2-degree-of-freedom flexure-based micro-motion stage. (11th March 2016)

• Record Type: Journal Article
• Authors: Du, Yunsong; Li, Tiemin; Jiang, Yao; Wang, Haitong
• Is Part Of: Advances in mechanical engineering. Volume 8:Number 3(2016:Mar.)
• Publication Date: 2016-03-11
• Subjects: Flexure hinge -- micro-motion stage -- decoupled property -- cooperative tracking performance; Mechanical engineering -- Periodicals; 621.05
• DOI: 10.1177/1687814016638301
• Languages: English
• ISSNs: 1687-8132

Abstract

This article presents the mechanical design, dimensional optimization, finite element analysis, and experimentation of a 2-degree-of-freedom flexure-based micro-motion stage. The stage is composed of four parallel limbs with symmetrical configuration, and each limb is composed of two serially connected prismatic joints. The divided parts of flexure hinge thickness constituting the two prismatic joints are selected as two. Based on analytical models established in stiffness and dynamic analysis, the dimensional optimization is carried out to maximize the first resonance frequency. Finite element analysis is then adapted to verify the stiffness, workspace, and dynamic behavior. Finally, a prototype of the stage is manufactured and an experimental platform is set up. The experimental results show that the stage has a workspace range of 19.53 µm × 19.07 µm with a frequency of 1987 Hz, and the cross-coupling ratio between two axes is less than 1%. For high-frequency cooperative tracking experiments, a proportional–integral controller is implemented to compensate for the tracking errors. Finally, good tracking performance at high frequency is obtained, which validates the effectiveness of the micro-motion stage.