Vision-based calibration of a Hexa parallel robot. Issue 3 (13th May 2014)

• Record Type: Journal Article
• Authors: Dehghani, Mehdi; Ahmadi, Mahdi; Khayatian, Alireza; Eghtesad, Mohamad; Yazdi, Mehran
• Is Part Of: Industrial robot. Volume 41:Issue 3(2014)
• Page Start: 296
• Page End: 310
• Publication Date: 2014-05-13
• Subjects: Hexa parallel robot -- Calibration -- Vision; Robots, Industrial -- Periodicals; Machinery in the workplace -- Periodicals; 629.892
• DOI: 10.1108/IR-07-2013-376
• Languages: English
• ISSNs: 0143-991X

Abstract

Abstract : Purpose: – The purpose of this paper is to present a vision-based method for the kinematic calibration of a six-degrees-of-freedom parallel robot named Hexa using only one Universal Serial Bus (USB) camera and a chess pattern installed on the robot's mobile platform. Such an approach avoids using any internal sensors or complex three-dimensional measurement systems to obtain the pose (position/orientation) of the robot's end-effector or the joint coordinates. Design/methodology/approach: – The setup of the proposed method is very simple; only one USB camera connected to a laptop computer is needed and no contact with the robot is necessary during the calibration procedure. For camera modeling, a pinhole model is used; it is then modified by considering some distortion coefficients. Intrinsic and extrinsic parameters and the distortion coefficients are found by an offline minimization algorithm. The chess pattern makes image corner detection very straightforward; this detection leads to finding the camera and then the kinematic parameters. To carry out the calibration procedure, several trajectories are run (the results of two of them are presented here) and sufficient specifications of the poses (positions/orientations) are calculated to find the kinematic parameters of the robot. Experimental results obtained when applying the calibration procedure on a Hexa parallel robot show that vision-based kinematic calibration yields enhanced and efficient positioning accuracy. After successful calibration and addition of an appropriate control scheme, the robot has been considered as a color-painting prototype robot to serve in relevant industries. Findings: – Experimental results obtained when applying the calibration procedure on a Hexa parallel robot show that vision-based kinematic calibration yields enhanced and efficient positioning accuracy. Originality/value: – The enhanced results show the advantages of this method in comparison with the previous calibration methods.