Electrochemical reduction of carbon dioxide to formate with Fe-C electrodes in anaerobic sludge digestion process. (1st December 2016)

• Record Type: Journal Article
• Authors: Zhao, Zisheng; zhang, Yaobin; Li, Yang; Zhao, Huimin; Quan, Xie
• Is Part Of: Water research. Volume 106(2016)
• Page Start: 339
• Page End: 343
• Publication Date: 2016-12-01
• Subjects: CO2 reduction -- Hydrogen production -- Formate production -- Clean energy -- MES; Water -- Pollution -- Research -- Periodicals; 363.7394
• DOI: 10.1016/j.watres.2016.10.018
• Languages: English
• ISSNs: 0043-1354

Abstract

Abstract: Electrochemical reduction of carbon dioxide (CO2 ) to useful chemicals is an attractive strategy to cut its emission in atmosphere. However, high overpotential and energy consumption required in the electrochemical reduction are the major barriers of this process. In this study, a new CO2 reduction technique for production of formic acid was proposed from waste activated sludge digestion in a microbial electrosynthesis system (MES) with iron plate and carbon pillar as the electrodes. Compared with other reactors, methane production of the Fe-C MES reactor was slightly lower and CO2 was undetectable. Instead, considerable formate (672.3 mg/L) and H2 (45.8 mL) were produced in this Fe-C MES reactor, but not found in the other reactors. It should be ascribed to the reduction of CO2 and H + at cathode. The reduction of H + resulted in a weak alkaline pH (9.3), which made the methanogenesis slightly lower in Fe-C MES. Graphical abstract: Highlights: Clean energy was produced from anaerobic digestion of waste activated sludge. All CO2 produced during the digestion process was reduced to formate at cathode in the MEC. Vast hydrogen was produced during the waste activated sludge digestion. Low cost electrodes were used to reduce CO2 to formate.