Synthesis of Ni/SBA-15 for CO2 reforming of CH4: Utilization of palm oil fuel ash as silica source. (2018)

• Record Type: Journal Article
• Authors: Abdullah, N.; Chong, C.C.; Razak, H.A.; Ainirazali, N.; Chin, S.Y.; Setiabudi, H.D.
• Is Part Of: Materials today. Volume 5:Number 10(2018)Part 2
• Page Start: 21594
• Page End: 21603
• Publication Date: 2018
• Subjects: POFA -- Alkali fusion method -- H2/CO ratio -- CO2 dry reforming; Materials science -- Congresses -- Periodicals; 620.1
• DOI: 10.1016/j.matpr.2018.07.008
• Languages: English
• ISSNs: 2214-7853

Abstract

Abstract: In this study, Ni/SBA-15 was synthesized using Palm Oil Fuel Ash (POFA) as the silica source and was applied in the CO2 reforming of CH4. The preparation of POFA sodium silicate (POFA-Na2 SiO3 ) was done using sodium hydroxide (NaOH) fusion method under several parameters including NaOH/POFA mass ratio, fusion temperature and H2 O/ NaOH-fused POFA mass ratio. The optimum condition was achieved at NaOH/POFA mass ratio of 2:1, fusion temperature of 550°C and H2 O/ NaOH-fused POFA mass ratio of 4:1, with maximum silica content of 40570 ppm. The obtained POFA-Na2 SiO3 was used as the silica source for the synthesis of Ni/SBA-15(POFA), and its properties and catalytic performance were compared with Ni/SBA-15(TEOS). The physicochemical properties of the catalysts were characterized using XRD, BET and FTIR, meanwhile the catalytic performance of the catalyst was carried out in a fixed bed reactor at 800°C, atmospheric pressure and CO2 /CH4 feed ratio of 1/1. The characterization results revealed that the physicohemical properties of Ni/SBA-15(POFA) were comparable with Ni/SBA-15(TEOS), except for the size of Ni and the strength of metal-support interaction. The catalytic performance results showed that Ni/SBA-15(POFA) has comparable CO2 conversion (around 89%), but lower in CH4 conversion (differences around 31.5%) and stability, which might be due to the larger Ni size and weak metal-support interaction in Ni/SBA-15(POFA) as compared to Ni/SBA-15(TEOS). Although Ni/SBA-15(POFA) showed lower catalytic performance towards CO2 reforming of CH4, POFA can be considered as an alternative silica source to synthesis Ni/SBA-15 owing to the fact that the deficiency observed in the present catalyst can be improved via metal loading method.