Directed acoustic shearography for crack detection around fastener holes in aluminum plates. (December 2018)

• Record Type: Journal Article
• Authors: Liu, Huajun; Liu, Menglong; Zhang, Lei; Chen, Yi Fan; Tan, Chin Yaw; Guo, Shifeng; Cui, Fangsen
• Is Part Of: NDT & E international. Volume 100(2018)
• Page Start: 124
• Page End: 131
• Publication Date: 2018-12
• Subjects: Directed acoustic shearography -- Phased array -- Cracks -- Fastener holes -- Transducers; Nondestructive testing -- Periodicals; Contrôle non destructif -- Périodiques; Electronic journals; 620.1127
• DOI: 10.1016/j.ndteint.2018.09.007
• Languages: English
• ISSNs: 0963-8695

Abstract

Abstract: The detection of fatigue cracks around fastener holes in riveted structures is important to ensure the safety of the structures and to prevent major structural failure. However, due to the complex structure around the fastener holes, the existing non-destructive methods are not effective to address this challenge. Here, we demonstrate a directed acoustic shearography system using a ring-shaped phased array transducer for crack imaging around fastener holes in thick aluminum plates. Supported by numerical simulations, a 16-element ring-shaped phased array transducer was designed, fabricated and tested. The 16-element phased array transducer was excited by an in-house developed phased array drive circuit to control the directions of acoustic waves. Directed acoustic shearography testing with the ring-shaped phased array transducer showed that by controlling the direction of acoustic waves, the imaging contrast of the defects could be significantly improved. Directed acoustic shearography was able to detect subsurface crack which was not detectable by conventional acoustic shearography excited at the same voltage and frequency. This work demonstrates a promising practical NDT tool for fast and full-field detection of surface and subsurface defects with significantly enhanced sensitivity.