The comparison of microstructures and mechanical properties between 14Cr-Al and 14Cr-Ti ferritic ODS alloys. (15th May 2016)

• Record Type: Journal Article
• Authors: Zhang, Guangming; Zhou, Zhangjian; Mo, Kun; Miao, Yinbin; Li, Shaofu; Liu, Xiang; Wang, Man; Park, Jun-Sang; Almer, Jonathan; Stubbins, James F.
• Is Part Of: Materials & design. Volume 98(2016)
• Page Start: 61
• Page End: 67
• Publication Date: 2016-05-15
• Subjects: Synchrotron X-ray diffraction -- Tensile deformation -- Nanoscale particles -- Microstructure; Materials -- Periodicals; Engineering design -- Periodicals; Matériaux -- Périodiques; Conception technique -- Périodiques; Electronic journals; 620.11
• DOI: 10.1016/j.matdes.2016.02.117
• Languages: English
• ISSNs: 0264-1275

Abstract

Abstract: In this study, two kinds of 14Cr ODS alloys (14Cr-Al and 14Cr-Ti) were investigated to reveal the different effects between Al and Ti on the microstructures and mechanical properties of 14Cr ferritic ODS alloys. The microstructure information such as grains, minor phases of these two alloys has been investigated by high-energy X-ray diffraction and transmission electron microscopy (TEM). The in situ synchrotron X-ray diffraction tensile test was applied to investigate the mechanical properties of these two alloys. The lattice strains of different phases through the entire tensile deformation process in these two alloys were analyzed to calculate their elastic stresses. From the comparison of elastic stress, the strengthening capability of Y2 Ti2 O7 is better than TiN in 14Cr-Ti, and the strengthening capability of YAH is much better than YAM and AlN in 14Cr-Al ODS. The dislocation densities of 14Cr-Ti and 14Cr-Al ODS alloys during tensile deformation were also examined by modified Williamson-Hall analyses of peak broadening, respectively. The different increasing speed of dislocation density with plastic deformation reveals the better strengthening effect of Y-Ti-O particles in 14Cr-Ti ODS than that of Y-Al-O particles in 14Cr-Al ODS alloy. Graphical abstract: Highlights: The different effects of Al and Ti on the properties of 14Cr ferritic oxide dispersion strengthening alloy were investigated. Y2Ti2O7 and TiN in 14Cr-Ti, while YAM, YAH and AlN in 14Cr-Al oxide dispersion strengthening alloy were identified. The strengthening capabilities of minor phases in 14Cr-Ti and 14Cr-Al ODS alloy were investigated, respectively. Dislocation density increased slower in 14Cr-Al than that in 14Cr-Ti oxide dispersion strengthening alloy.