An experimental investigation of design parameters for pico-hydro Turgo turbines using a response surface methodology. (January 2016)

• Record Type: Journal Article
• Authors: Gaiser, Kyle; Erickson, Paul; Stroeve, Pieter; Delplanque, Jean-Pierre
• Is Part Of: Renewable energy. Volume 85(2016)
• Page Start: 406
• Page End: 418
• Publication Date: 2016-01
• Subjects: Pico-hydro -- Turgo turbine -- Hydroelectricity -- Optimization -- Central composite design -- Response surface methodology; Renewable energy sources -- Periodicals; Power resources -- Periodicals; Énergies renouvelables -- Périodiques; Ressources énergétiques -- Périodiques; 333.794
• DOI: 10.1016/j.renene.2015.06.049
• Languages: English
• ISSNs: 0960-1481

Abstract

Abstract: Millions of off-grid homes in remote areas around the world have access to pico-hydro (5 kW or less) resources that are undeveloped due to prohibitive installed costs ($/kW). The Turgo turbine, a hydroelectric impulse turbine generally suited for medium to high head applications, has gained renewed attention in research due to its potential applicability to such sites. Nevertheless, published literature about the Turgo turbine is limited and indicates that current theory and experimental knowledge do not adequately explain the effects of certain design parameters, such as nozzle diameter, jet inlet angle, number of blades, and blade speed on the turbine's efficiency. In this study, these parameters are used in a three-level (3 4 ) central composite response surface experiment. A low-cost Turgo turbine is built and tested from readily available materials and a second order regression model is developed to predict its efficiency as a function of each parameter above and their interactions. The effects of blade orientation angle and jet impact location on efficiency are also investigated and experimentally found to be of relatively little significance to the turbine. The purpose of this study is to establish empirical design guidelines that enable small hydroelectric manufacturers and individuals to design low-cost efficient Turgo Turbines that can be optimized to a specific pico-hydro site. The results are also expressed in dimensionless parameters to allow for potential scaling to larger systems and manufacturers. Highlights: A pico-hydro Turgo Turbine was built from household materials at a cost of $30 USD. Experimentally determined the effect of jet angle, blade number, nozzle diameter and RPM on efficiency. Empirical formulae enable optimized turbine design for any given head and flow. Results indicate that all parameters have significant second-order main effects and interactions. Optimum parameters were: 35° nozzle angle, nozzle diameter to blade spacing ratio = 0.94, and speed ratio of 0.43.