Assessment of carbon nanotube yarns as reinforcement for composite overwrapped pressure vessels. (May 2016)

• Record Type: Journal Article
• Authors: Kim, Jae-Woo; Sauti, Godfrey; Cano, Roberto J.; Wincheski, Russell A.; Ratcliffe, James G.; Czabaj, Michael; Gardner, Nathaniel W.; Siochi, Emilie J.
• Is Part Of: Composites. Volume 84(2016)
• Page Start: 256
• Page End: 265
• Publication Date: 2016-05
• Subjects: Carbon nanotube -- A. Nanocomposites -- E. Filament winding -- B. Mechanical properties; Composite materials -- Periodicals; Manufacturing processes -- Periodicals; Composite materials; Manufacturing processes; Periodicals; 620.11805
• DOI: 10.1016/j.compositesa.2016.02.003
• Languages: English
• ISSNs: 1359-835X

Abstract

Abstract: Carbon nanotubes (CNTs) are one-dimensional nanomaterials with outstanding electrical and thermal conductivities and mechanical properties. Recent advances in CNT manufacturing have made bulk forms such as yarns, tapes and sheets available in commercial quantities to permit the evaluation of these materials for aerospace use. The high tensile properties of CNT composites can be exploited in tension-dominated applications such as composite overwrapped pressure vessels (COPVs). To investigate their utility in this application, aluminum (Al) rings were overwrapped with thermoset/CNT yarn, thermally cured under a vacuum bag, and their mechanical properties measured. Fabrication parameters such as CNT/resin ratio, tension applied during winding, and the number of CNT yarn layers were investigated to determine their effects on the mechanical performance of overwrapped Al rings. Mechanical properties of the CNT composite overwrapped Al rings (CCOARs) were measured under static and cyclic loads at room, elevated, and cryogenic temperatures to evaluate their performance relative to bare Al rings. The ultimate load carried by the composite overwrap in the CCOARs increased with increasing number of wraps. The wet winding process for the CCOAR fabrication improved load transfer compared to the dry winding process due to enhanced interfacial adhesion between the CNT yarn and the applied resin. Wet winding Al rings with CNT yarn/thermoset overwraps resulted in ∼11% increase in weight relative to the bare ring and increased the room temperature breaking load by over 200%.