Power output analysis and optimization of two straight-bladed vertical-axis wind turbines. (1st January 2017)

• Record Type: Journal Article
• Authors: Chen, Wei-Hsin; Chen, Ching-Ying; Huang, Chun-Yen; Hwang, Chii-Jong
• Is Part Of: Applied energy. Volume 185:Part 1(2017)
• Page Start: 223
• Page End: 232
• Publication Date: 2017-01-01
• Subjects: Wind power -- Straight-bladed vertical-axis wind turbine (SB-VAWT) -- Power output -- Taguchi method -- Optimum operation -- Numerical simulation; Power (Mechanics) -- Periodicals; Energy conservation -- Periodicals; Energy conversion -- Periodicals; 621.042
• DOI: 10.1016/j.apenergy.2016.10.076
• Languages: English
• ISSNs: 0306-2619

Abstract

Highlights: Power output of two straight-bladed vertical-axis wind turbines is simulated. Performance of the system is analyzed and optimized using Taguchi method. The influence strength order of each factor is featured by λ > β > RD > S/d > ϕ. Tip speed ratio and incoming flow angle play crucial roles in determining power output. Mean power output of optimized dual turbine system is higher than single one by 9.97%. Abstract: The power output of two straight-bladed vertical-axis wind turbines is simulated using computational fluid dynamics (CFD) as well as analyzed and optimized using the Taguchi method. Five operating factors of incoming flow angle (β), tip speed ratio (λ), turbine spacing (S/d), rotational direction (RD), and blade angle (ϕ) along with four levels are taken into consideration to account for their influences on the performance of the dual turbine system. An orthogonal array of L16 (4 5 ) is designed. The profile of extent indicates that the factors λ and β play crucial roles in determining power output, whereas the factor ϕ almost plays no part on the power output. The influence strength order of each factor is featured by λ > β > RD > S/d > ϕ. Furthermore, the analysis of the signal-to-noise (S/N) ratio suggests that the combination of the five factors for maximizing the power output of the system is located at λ = 2, β = 120°, (clockwise, counterclockwise), S/d =3, and ϕ = 0°. With this operation, flow velocity in three regions beyond, below, and between the two turbines is enhanced from their interaction, whereas it drops drastically in the wake regions. Compared to the single wind turbine operated at λ = 2 along with the same wind speed (=8 m s −1 ) and counterclockwise rotation, the mean power coefficient (Cp, average ) of the dual turbine system operated at the optimal combination is enlarged by 9.97%.