Co-gasification of lignite and waste wood in a pilot-scale (10 kWe) downdraft gasifier. (15th January 2017)

• Record Type: Journal Article
• Authors: Patel, Vimal R.; Patel, Darshil; Varia, Nandan S.; Patel, Rajesh N.
• Is Part Of: Energy. Volume 119(2017)
• Page Start: 834
• Page End: 844
• Publication Date: 2017-01-15
• Subjects: Co-gasification -- Lignite and waste wood -- Pilot-scale downdraft gasifier -- Clinker formation -- Exergy -- Mass and energy balances; Power resources -- Periodicals; Power (Mechanics) -- Periodicals; Energy consumption -- Periodicals; 333.7905
• DOI: 10.1016/j.energy.2016.11.057
• Languages: English
• ISSNs: 0360-5442

Abstract

Abstract: Gasification of lignite and waste wood mixtures is investigated in an atmospheric pilot-scale (10 kWe) downdraft gasifier, employing air as the gasifying medium. The system was originally designed and built for lignite fuel. The gasifier was operated on various lignite particle sizes; 22–25 mm particle size was found favourable. However, clinker formation was observed during operation of gasifier using lignite as a fuel. Other issues were clinker formation, bridging or channel burning, erosion and corrosion due to high ash content of lignite, etc. The co-gasification study was intended to minimize the clinker formation along with improvement in the producer gas heating value. In order to do so, experiments with mixture of waste wood-lignite were carried out. Mixture ratios of 10%–90%, 20%–80% and 30%–70% (w/w) of waste wood-lignite were investigated and results of co-gasification experiments were compared to lignite only gasification. The lignite and wood particle size was 22–25 mm and 50 × 50 × 5 mm respectively. The gasifier performance was evaluated on various parameters namely, specific gas yield, efficiency based on energy and exergy, fuel consumption rate and gas composition. Mass and energy balances were carried out for gasification of lignite and its mixture with waste wood. With increase in wood percentage, the clinker formation reduced and almost became negligent with wood percentage reaching to 30%. The energy efficiency, exergy efficiency, LHV (Lower heating value) of gas and gas yield increased by 8.92%, 11.66%, 6.31% and 9.33%, respectively. Highlights: A pilot-scale (10 kWe) downdraft type fixed bed gasifier was designed & developed. A various wood-lignite mixture (w/w) was used as feedstock for downdraft gasifier. Effect of wood content on the clinker formation and gasifier performance was studied. Gas yield and fuel consumption increased with increase in wood content. The presence of wood improved the process efficiency and heating value of gas.