Concrete-filled bimetallic tubes under axial compression: Experimental investigation. (November 2016)

• Record Type: Journal Article
• Authors: Ye, Yong; Han, Lin-Hai; Sheehan, Therese; Guo, Zi-Xiong
• Is Part Of: Thin-walled structures. Volume 108(2016)
• Page Start: 321
• Page End: 332
• Publication Date: 2016-11
• Subjects: Concrete-filled bimetallic tubes (CFBT) -- Axial compression -- Composite action -- Stainless steel -- Experimental investigation; Thin-walled structures -- Periodicals; 690.1
• DOI: 10.1016/j.tws.2016.09.004
• Languages: English
• ISSNs: 0263-8231

Abstract

Abstract: This paper presents the experimental results of axial compression tests on concrete-filled bimetallic tubes (CFBT). The cross section of the bimetallic tube is composed of an outer layer made of stainless steel and an inner layer made of carbon steel. A total of 12 specimens with a circular cross section were tested under axial compression. The test parameters included the thickness of the stainless steel tube layer ( t ss =0–1.36 mm) and the compressive strength of the infilled concrete ( f cu =21.1–42.8 MPa). Test results showed that, the two layers of the bimetallic tube worked well together, and the CFBT specimens exhibited ductile characteristics. The influence of the parameters on the failure mode, load versus deformation relationship, axial compressive strength, and strain development of the tested specimens were investigated. Finally, the feasibility of three existing design codes for predicting the axial compressive strength of CFBT under axial compression was evaluated. Highlights: Axial compression tests on a series of CFST and CFBT short columns. Analysis on composite actions between different components of a CFBT column. Comparison of CFBT bearing capacity between experimental and predicted values.