High-performance membrane electrode assembly with multi-functional Pt/SnO2–SiO2/C catalyst for proton exchange membrane fuel cell operated under low-humidity conditions. (8th June 2016)

• Record Type: Journal Article
• Authors: Hou, Sanying; Chen, Rong; Zou, Haobin; Shu, Ting; Ren, Jianwei; Li, Xiuhua; Liao, Shijun
• Is Part Of: International journal of hydrogen energy. Volume 41:Number 21(2016)
• Page Start: 9197
• Page End: 9203
• Publication Date: 2016-06-08
• Subjects: Proton exchange membrane fuel cell -- Membrane electrode assembly -- Silicon and tin oxides -- Low humidification; Hydrogen as fuel -- Periodicals; Hydrogène (Combustible) -- Périodiques; Hydrogen as fuel; Periodicals; 665.81
• DOI: 10.1016/j.ijhydene.2015.12.084
• Languages: English
• ISSNs: 0360-3199

Abstract

Abstract: A novel self-humidifying membrane electrode assembly (MEA) with homemade multi-functional Pt/SnO2 –SiO2 /C as the anode was developed to improve the performance of a proton exchange membrane fuel cell under low humidity. The MEAs' performance was evaluated at various temperatures and relative humidity levels. One MEA with a Pt/SnO2 –SiO2 /C anode catalyst achieved excellent low-humidity performance at a cell temperature of up to 60 °C: the current density reached 600 mA cm −2 at 0.7 V and 1050 mA cm −2 at 0.6 V with 10% RH; after 96 h of continuous operation under the same conditions, the current density decreased by only 16% (to ∼880 mA cm −2 ), whereas the current density of an MEA with JM Pt/C as the anode degraded by more than 60% within 10 h. The contact angle of the Pt/SnO2 –SiO2 /C anode was much lower than that of the Pt/C anode, indicating the former's excellent wettability. The high performance of the MEA with the Pt/SnO2 –SiO2 /C anode is attributable to the wettability of the doped binary oxide, especially of silicon oxide, and the promotion of tin oxide, which caused an interaction between the Pt and the oxide, resulting in enhanced performance under low humidification. Graphical abstract: The MEA prepared by home-made multi-functional Pt/SnO2 –SiO2 /C as the anode catalyst exhibits high and stable self-humidification performance at cell temperature of 60 °C and 10% relative humidity, the current density at 0.6 V can be up to 1050 mA cm −2 and stable at 880 mA cm −2 after 96 h continuous running, with the degradation of 16%, which is much better than that of the blank MEA without insertion. Highlights: Self-humidification MEA is fabricated with home-made Pt/SnO2 –SiO2 /C anode catalyst. The MEA shows good self-humidification performance at 60 °C and 10% RH. The current density is up to 1050 mA cm −2 at 0.6 V at 60 °C and 10% RH condition. The long term testing of 96 h reveals the good stability of the MEA at low RH.