Fracture assessment of polyacrylonitrile nanofiber-reinforced epoxy adhesive. (October 2018)

• Record Type: Journal Article
• Authors: Razavi, S.M.J.; Neisiany, R. Esmaeely; Ayatollahi, M.R.; Ramakrishna, S.; Khorasani, S. Nouri; Berto, F.
• Is Part Of: Theoretical and applied fracture mechanics. Volume 97(2018)
• Page Start: 448
• Page End: 453
• Publication Date: 2018-10
• Subjects: Adhesive joints -- Electrospun polyacrylonitrile nanofibers -- Energy release rate -- Fracture energy; Fracture mechanics -- Periodicals; 620.1126
• DOI: 10.1016/j.tafmec.2017.07.023
• Languages: English
• ISSNs: 0167-8442

Abstract

Graphical abstract: Highlights: Electrospun polyacrylonitrile nanofibers were incorporated in an adhesive. Fracture tests were conducted on both neat and reinforced adhesives. The amount of electrospun PAN nanofiber were found as key parameter. Incorporating PAN nanofibers considerably increased the mode I fracture energy. Abstract: Electrospun polyacrylonitrile (PAN) nanofibers were incorporated in an epoxy-based adhesive layer to improve the adhesive joint's mechanical performance. The morphological study of the electrospun PAN nanofibers revealed that the fabricated nanofibers were smooth, continuous, and without beads. The average diameter of the nanofibers was determined to be 362 ± 87 nm. The Double Cantilever Beam (DCB) specimens were tested and the fracture energies were determined for the unreinforced and reinforced adhesives. The outstanding reinforcing capability of PAN nanofibers was demonstrated by significant improvements in fracture energy of the adhesive containing PAN nanofibers. A maximum improvement of 127% in the mode I fracture energy of adhesive was achieved by incorporating 2 g/m 2 of PAN nanofibers into the adhesive layer. Moreover, the morphology of the fracture surfaces was examined using the Scanning Electron Microscopy (SEM) technique to evaluate the toughening mechanisms resulting from this improvement.