Rolling element bearing defect diagnosis under variable speed operation through angle synchronous averaging of wavelet de-noised estimate. (May 2016)

• Record Type: Journal Article
• Authors: Mishra, C.; Samantaray, A.K.; Chakraborty, G.
• Is Part Of: Mechanical systems and signal processing. Volume 72/73(2016)
• Page Start: 206
• Page End: 222
• Publication Date: 2016-05
• Subjects: Rolling element bearing defect -- Variable speed operation -- Short-duration angle synchronous averaging -- Wavelet de-noising -- Order tracking; Structural dynamics -- Periodicals; Vibration -- Periodicals; Constructions -- Dynamique -- Périodiques; Vibration -- Périodiques; Structural dynamics; Vibration; Periodicals; 621
• DOI: 10.1016/j.ymssp.2015.10.019
• Languages: English
• ISSNs: 0888-3270

Abstract

Abstract: Rolling element bearings are widely used in rotating machines and their faults can lead to excessive vibration levels and/or complete seizure of the machine. Under special operating conditions such as non-uniform or low speed shaft rotation, the available fault diagnosis methods cannot be applied for bearing fault diagnosis with full confidence. Fault symptoms in such operating conditions cannot be easily extracted through usual measurement and signal processing techniques. A typical example is a bearing in heavy rolling mill with variable load and disturbance from other sources. In extremely slow speed operation, variation in speed due to speed controller transients or external disturbances (e.g., varying load) can be relatively high. To account for speed variation, instantaneous angular position instead of time is used as the base variable of signals for signal processing purposes. Even with time synchronous averaging (TSA) and well-established methods like envelope order analysis, rolling element faults in rolling element bearings cannot be easily identified during such operating conditions. In this article we propose to use order tracking on the envelope of the wavelet de-noised estimate of the short-duration angle synchronous averaged signal to diagnose faults in rolling element bearing operating under the stated special conditions. The proposed four-stage sequential signal processing method eliminates uncorrelated content, avoids signal smearing and exposes only the fault frequencies and its harmonics in the spectrum. We use experimental data 1 from a laboratory setup to validate the diagnosis tool for bearing raceway and rolling element faults. Highlights: Deals with bearing fault diagnosis in variable speed rotation. Combines angle synchronous averaging with wavelet de-noising. Exposes fault symptoms clearly and removes ambiguity in diagnosis.