Rheology of simulated radioactive waste slurry and cold cap during vitrification. Issue 11 (8th June 2018)

• Record Type: Journal Article
• Authors: McCarthy, Benjamin P.; George, Jaime L.; Dixon, Derek R.; Wheeler, Michelle; Cutforth, Derek A.; Hrma, Pavel; Linn, Diana; Chun, Jaehun; Hujova, Miroslava; Kruger, Albert A.; Pokorny, Richard
• Is Part Of: Journal of the American Ceramic Society. Volume 101:Issue 11(2018)
• Page Start: 5020
• Page End: 5029
• Publication Date: 2018-06-08
• Subjects: glass melting -- nuclear waste -- rheology/rheometry -- viscosity; Ceramics -- Periodicals; 620.1405
• DOI: 10.1111/jace.15755
• Languages: English
• ISSNs: 0002-7820

Abstract

Abstract: During the vitrification of radioactive waste in a Joule‐heated melter, aqueous melter feed slurry forms a cold cap, a reacting and melting material, which floats on the surface of the molten glass. The rheological behavior of the feed affects cold cap formation and shape, and is vital for modeling the feed‐to‐melt conversion process. We used slurry feed simulant and fast‐dried slurry solids representing the cold cap to investigate the rheological behavior of the feed as it transforms into glass. Both low‐temperature and high‐temperature rheometry were performed and a new scheme was applied to estimate the feed viscosity. This study shows that the conversion advances in four sequential stages that form distinct regions in the cold cap: (i) a fast‐spreading boiling slurry from which water evaporates, (ii) a porous solid region (viscosity > 10 8 Pa s) containing reacting solids and molten salts, (iii) a plastic region in which glass‐forming melt connects the refractory solids (~10 8 to ~10 6 Pa s), and (iv) a viscous foam layer in which the viscosity drops from ~10 5 to ~10 1 Pa s. The implications for the mathematical modeling of the cold cap are discussed.