A methodology to reduce variability during vacuum infusion with optimized design of distribution media. (November 2015)

• Record Type: Journal Article
• Authors: Sas, Hatice S.; Šimáček, Pavel; Advani, Suresh G.
• Is Part Of: Composites. Volume 78(2015)
• Page Start: 223
• Page End: 233
• Publication Date: 2015-11
• Subjects: E. Resin flow -- C. Numerical analysis -- C. Computational modeling -- E. Resin transfer molding (RTM); Composite materials -- Periodicals; Manufacturing processes -- Periodicals; Composite materials; Manufacturing processes; Periodicals; 620.11805
• DOI: 10.1016/j.compositesa.2015.08.011
• Languages: English
• ISSNs: 1359-835X

Abstract

Abstract: Seemann Composites Resin Infusion Molding Process (SCRIMP) is a widely used version of Vacuum Assisted Resin Transfer Molding (VARTM) in which a highly permeable layer (distribution media) is placed on top of the dry preform to distribute the resin with very low flow resistance to reduce the filling and hence the manufacturing time. The flow patterns during filling may vary from part to part due to the variability associated with the material, part geometry, and layup of the assembly, which may result in race-tracking channels. The process is considered as reliable and robust only if the resin completely saturates the preform despite changing filling patterns caused by flow disturbances. The resin flow pattern can be manipulated with a tailored distribution media layout as it does impact the flow patterns significantly. The continuous distribution media layout over the entire part surface works well for very simple geometries with no to little potential for race-tracking along the edges. In this study we address complex cases, which require placement of an insert within the assembly, which will introduce race-tracking along its edges, and hence uniform placement of distribution media over the entire top surface will fail to yield a void free part. We introduce a methodology using a predictive tool to design an optimal shape of distribution media, which accounts for the flow variability introduced due to race-tracking along the edges of the inserts. This iterative approach quickly converges to provide the placement of distribution media on selective areas of the preform surface that ensures complete filling of the preform despite the variability. This approach has been validated with an experimental example and will help mitigate risk involved in manufacturing complex composites components with Liquid Molding.