Development and characterization of sugar palm starch and poly(lactic acid) bilayer films. (1st August 2016)

• Record Type: Journal Article
• Authors: Sanyang, M.L.; Sapuan, S.M.; Jawaid, M.; Ishak, M.R.; Sahari, J.
• Is Part Of: Carbohydrate polymers. Volume 146(2016)
• Page Start: 36
• Page End: 45
• Publication Date: 2016-08-01
• Subjects: Sugar palm starch -- Poly(lactic acid) -- Bilayer film -- Food packaging; Polysaccharides -- Periodicals; Polysaccharides -- Periodicals; Polysaccharides -- Périodiques; Electronic journals; 547.78
• DOI: 10.1016/j.carbpol.2016.03.051
• Languages: English
• ISSNs: 0144-8617

Abstract

Highlights: Development of biodegradable bilayer films from sugar palm starch and PLA. Physical, mechanical, thermal and water barrier properties of films were analyzed. The combination of SPS50-PLA50 films produced the best functional properties. SPS50-PLA50 showed better tensile strength and permeability compared to SPS films. Water absorption value of SPS50-PLA50 decreased by 65.89% with respect to SPS100. Abstract: The development and characterization of environmentally friendly bilayer films from sugar palm starch (SPS) and poly(lactic acid) (PLA) were conducted in this study. The SPS-PLA bilayer films and their individual components were characterized for their physical, mechanical, thermal and water barrier properties. Addition of 50% PLA layer onto 50% SPS layer (SPS50-PLA50) increased the tensile strength of neat SPS film from 7.74 to 13.65 MPa but reduced their elongation at break from 46.66 to 15.53%. The incorporation of PLA layer significantly reduced the water vapor permeability as well as the water uptake and solubility of bilayer films which was attributed to the hydrophobic characteristic of the PLA layer. Furthermore, scanning electron microscopy (SEM) image of SPS50-PLA50 revealed lack of strong interfacial adhesion between the SPS and PLA. Overall, the incorporation of PLA layer onto SPS films enhances the suitability of SPS based films for food packaging.