Damage identification in beams using speckle shearography and an optimal spatial sampling. (15th October 2016)

• Record Type: Journal Article
• Authors: Mininni, M.; Gabriele, S.; Lopes, H.; Araújo dos Santos, J.V.
• Is Part Of: Mechanical systems and signal processing. Volume 79(2016)
• Page Start: 47
• Page End: 64
• Publication Date: 2016-10-15
• Subjects: Multiple damage -- Finite differences -- Optimal sampling -- Modal rotation -- Shearography -- Model updating; Structural dynamics -- Periodicals; Vibration -- Periodicals; Constructions -- Dynamique -- Périodiques; Vibration -- Périodiques; Structural dynamics; Vibration; Periodicals; 621
• DOI: 10.1016/j.ymssp.2016.02.039
• Languages: English
• ISSNs: 0888-3270

Abstract

Abstract: Over the years, the derivatives of modal displacement and rotation fields have been used to localize damage in beams. Usually, the derivatives are computed by applying finite differences. The finite differences propagate and amplify the errors that exist in real measurements, and thus, it is necessary to minimize this problem in order to get reliable damage localizations. A way to decrease the propagation and amplification of the errors is to select an optimal spatial sampling. This paper presents a technique where an optimal spatial sampling of modal rotation fields is computed and used to obtain the modal curvatures. Experimental measurements of modal rotation fields of a beam with single and multiple damages are obtained with shearography, which is an optical technique allowing the measurement of full-fields. These measurements are used to test the validity of the optimal sampling technique for the improvement of damage localization in real structures. An investigation on the ability of a model updating technique to quantify the damage is also reported. The model updating technique is defined by the variations of measured natural frequencies and measured modal rotations and aims at calibrating the values of the second moment of area in the damaged areas, which were previously localized. Highlights: Improvement upon the method of curvatures of mode shapes for damage localization. Rotations are measured with speckle shearography. Optimal sampling is used to decrease the propagation and amplification of noise and errors. Small slots with depths below 7% of the thickness are localized. Investigation on damage quantification using an updating technique is conducted.