Direct Monte Carlo simulation of nanoscale mixed gas bearings. (9th June 2015)

• Record Type: Journal Article
• Authors: Myo, Kyaw Sett; Zhou, Weidong; Lee, Kok Leong; Yu, Shengkai; Hua, Wei
• Is Part Of: Advances in mechanical engineering. Volume 7:Number 6(2015:Jun.)
• Publication Date: 2015-06-09
• Subjects: Direct simulation Monte Carlo -- gas mixture -- head–disk interface -- air bearing; Mechanical engineering -- Periodicals; 621.05
• DOI: 10.1177/1687814015589528
• Languages: English
• ISSNs: 1687-8132

Abstract

The conception of sealed hard drives with helium gas mixture has been recently suggested over the current hard drives for achieving higher reliability and less position error. Therefore, it is important to understand the effects of different helium gas mixtures on the slider bearing characteristics in the head–disk interface. In this article, the helium/air and helium/argon gas mixtures are applied as the working fluids and their effects on the bearing characteristics are studied using the direct simulation Monte Carlo method. Based on direct simulation Monte Carlo simulations, the physical properties of these gas mixtures such as mean free path and dynamic viscosity are achieved and compared with those obtained from theoretical models. It is observed that both results are comparable. Using these gas mixture properties, the bearing pressure distributions are calculated under different fractions of helium with conventional molecular gas lubrication models. The outcomes reveal that the molecular gas lubrication results could have relatively good agreement with those of direct simulation Monte Carlo simulations, especially for pure air, helium, or argon gas cases. For gas mixtures, the bearing pressures predicted by molecular gas lubrication model are slightly larger than those from direct simulation Monte Carlo simulation.