Relevance of a hybrid process coupling adsorption and visible light photocatalysis involving a new hetero-system CuCo2O4/TiO2 for the removal of hexavalent chromium. Issue 1 (March 2015)

• Record Type: Journal Article
• Authors: Kebir, Mohammed; Trari, Mohamed; Maachi, Rachida; Nasrallah, Noureddine; Bellal, Bachir; Amrane, Abdeltif
• Is Part Of: Journal of environmental chemical engineering. Volume 3:Issue 1(2015:Mar.)
• Page Start: 548
• Page End: 559
• Publication Date: 2015-03
• Subjects: Chrome(VI) -- Adsorption -- Kinetic -- Isotherm -- Photocatalysis -- Hybrid process; Chemical engineering -- Environmental aspects -- Periodicals; Environmental engineering -- Periodicals; Chemical engineering -- Environmental aspects; Environmental engineering; Periodicals; 660.0286
• DOI: 10.1016/j.jece.2014.12.024
• Languages: English
• ISSNs: 2213-2929

Abstract

Highlights: Adsorption onto Sauge was combined to photocatalysis for Cr(VI) removal. Photocatalysis with new heterojunction system p -CuCo2 O4 / n -TiO2 under visible light. Tannery wastewater (2.25 mg L −1 Cr(VI)) was completely treated photocatalytically. The hybrid process showed its efficiency, 82% removal of 150 mg L −1 initial Cr(VI). Abstract: Chrome(VI) removal was investigated by adsorption onto an agricultural farm plant (Sauge) combined to photocatalysis onto the new hetero-system p -CuCo2 O4 / n -TiO2 in the presence of tartaric acid. In batch configuration, the equilibrium was reached after 3 h. Increasing the initial Cr(VI) concentration increased the adsorption capacity and decreased the efficiency removal and the optimal pH was found to be ∼2. Among the tested equilibrium isotherms, the Langmuir model led to the most accurate fit of experimental data. Adsorption kinetic data followed a pseudo-second order model and the intra-particle diffusion study revealed that the adsorption rate was not controlled by the diffusion step. The photo-reduction of Cr(VI) onto the hetero-system CuCo2 O4 /TiO2 under visible light was studied to complete the water treatment operation. The optimal photocatalytic performance was found for 25 mg L −1 initial Cr(VI) concentration and pH ∼2. Under these conditions, the hetero-system favored hydrogen formation, with an evolved volume of 1.70 cm 3 after 25 min. The contaminated industrial wastewater of tannery containing 2.25 mg L −1 was completely treated photo-catalytically. The hybrid process (adsorption/photocatalysis) was tested and showed its efficiency. For 150 mg L −1 initial amount, removal yield increased from 45% if only adsorption was considered to 82.6% by the hybrid process in less time. Hence, the hybrid process constitutes an eco-friendly approach, since it involves low cost and environmental friendly waste materials for the adsorption step (Sauge) and the hetero-system CuCo2 O4 /TiO2 allowing photochemical reduction under visible light.