Remediation of 17-α-ethinylestradiol aqueous solution by photocatalysis and electrochemically-assisted photocatalysis using TiO2 and TiO2/WO3 electrodes irradiated by a solar simulator. (1st April 2015)

• Record Type: Journal Article
• Authors: Oliveira, Haroldo G.; Ferreira, Leticia H.; Bertazzoli, Rodnei; Longo, Claudia
• Is Part Of: Water research. Volume 72(2015)
• Page Start: 305
• Page End: 314
• Publication Date: 2015-04-01
• Subjects: 17-α-ethinylestradiol -- TiO2 -- TiO2/WO3 -- Photocatalysis -- Photoelectrochemistry; Water -- Pollution -- Research -- Periodicals; 363.7394
• DOI: 10.1016/j.watres.2014.08.042
• Languages: English
• ISSNs: 0043-1354

Abstract

Abstract: TiO2 and TiO2 /WO3 electrodes, irradiated by a solar simulator in configurations for heterogeneous photocatalysis (HP) and electrochemically-assisted HP (EHP), were used to remediate aqueous solutions containing 10 mg L −1 (34 μmol L −1 ) of 17-α-ethinylestradiol (EE2), active component of most oral contraceptives. The photocatalysts consisted of 4.5 μm thick porous films of TiO2 and TiO2 /WO3 (molar ratio W/Ti of 12%) deposited on transparent electrodes from aqueous suspensions of TiO2 particles and WO3 precursors, followed by thermal treatment at 450 ° C. First, an energy diagram was organized with photoelectrochemical and UV–Vis absorption spectroscopy data and revealed that EE2 could be directly oxidized by the photogenerated holes at the semiconductor surfaces, considering the relative HOMO level for EE2 and the semiconductor valence band edges. Also, for the irradiated hybrid photocatalyst, electrons in TiO2 should be transferred to WO3 conduction band, while holes move toward TiO2 valence band, improving charge separation. The remediated EE2 solutions were analyzed by fluorescence, HPLC and total organic carbon measurements. As expected from the energy diagram, both photocatalysts promoted the EE2 oxidation in HP configuration; after 4 h, the EE2 concentration decayed to 6.2 mg L −1 (35% of EE2 removal) with irradiated TiO2 while TiO2 /WO3 electrode resulted in 45% EE2 removal. A higher performance was achieved in EHP systems, when a Pt wire was introduced as a counter-electrode and the photoelectrodes were biased at +0.7 V; then, the EE2 removal corresponded to 48 and 54% for the TiO2 and TiO2 /WO3, respectively. The hybrid TiO2 /WO3, when compared to TiO2 electrode, exhibited enhanced sunlight harvesting and improved separation of photogenerated charge carriers, resulting in higher performance for removing this contaminant of emerging concern from aqueous solution. Graphical abstract: Highlights: TiO2 and TiO2 /WO3 electrodes were used for EE2 aqueous solution remediation. The EE2 HOMO-LUMO, and semiconductor Conduction-Valence Band edges were evaluated. Both photocatalysts oxidized EE2 by Heterogeneous Photocatalysis (HP). Electro-assisted HP (EHP): a Pt counter-electrode allows electrode polarization. TiO2 /WO3 in EHP configuration exhibited the highest performance for EE2 removal.