Surfactant selection for a liquid foam‐bed photobioreactor. (16th February 2018)

• Record Type: Journal Article
• Authors: Janoska, Agnes; Vázquez, María; Janssen, Marcel; Wijffels, René H.; Cuaresma, María; Vílchez, Carlos
• Is Part Of: Biotechnology progress. Volume 34:Number 3(2018)
• Page Start: 711
• Page End: 720
• Publication Date: 2018-02-16
• Subjects: surfactant -- microalgae -- foam‐bed reactor -- liquid‐foam; Biotechnology -- Periodicals; Food industry and trade -- Periodicals; Bioengineering -- Periodicals; 660.6
• DOI: 10.1002/btpr.2614
• Languages: English
• ISSNs: 8756-7938

Abstract

Abstract : A novel liquid foam‐bed photobioreactor has been shown to hold potential as an innovative technology for microalgae production. In this study, a foam stabilizing agent has been selected which fits the requirements of use in a liquid foam‐bed photobioreactor. Four criteria were used for an optimal surfactant: the surfactant should have good foaming properties, should not be rapidly biodegradable, should drag up microalgae in the foam formed, and it should not be toxic for microalgae. Ten different surfactants (nonionic, cationic, and anionic) and two microalgae genera ( Chlorella and Scenedesmus ) were compared on the above‐mentioned criteria. The comparison showed the following facts. Firstly, poloxameric surfactants (Pluronic F68 and Pluronic P84) have acceptable foaming properties described by intermediate foam stability and liquid holdup and small bubble size. Secondly, the natural surfactants (BSA and Saponin) and Tween 20 were easily biodegraded by bacteria within 3 days. Thirdly, for all surfactants tested the microalgae concentration is reduced in the foam phase compared to the liquid phase with exception of the cationic surfactant CTAB. Lastly, only BSA, Saponin, Tween 20, and the two Pluronics were not toxic at concentrations of 10 CMC or higher. The findings of this study indicate that the Pluronics (F68 and P84) are the best surfactants regarding the above‐mentioned criteria. Since Pluronic F68 performed slightly better, this surfactant is recommended for application in a liquid foam‐bed photobioreactor. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:711–720, 2018