Boron dilution transient simulation analyses in a PWR with neutronics/thermal-hydraulics coupled codes in the NURISP project. (October 2015)

• Record Type: Journal Article
• Authors: Jimenez, G.; Herrero, J.J.; Gommlich, A.; Kliem, S.; Cuervo, D.; Jimenez, J.
• Is Part Of: Annals of nuclear energy. Volume 84(2015:Oct.)
• Page Start: 86
• Page End: 97
• Publication Date: 2015-10
• Subjects: Boron dilution -- NURISP -- NURESIM platform -- COBAYA3 -- DYN3D -- Reactivity accident; Nuclear energy -- Periodicals; Nuclear engineering -- Periodicals; 621.4805
• DOI: 10.1016/j.anucene.2014.11.002
• Languages: English
• ISSNs: 0306-4549

Abstract

Highlights: We simulated three boron dilution transient with different NK–TH coupled codes. We extensively analyzed the sensitivity to the main parameters. We found the most balanced combination to reproduce the results. Abstract: The detailed 3D calculation of a boron slug transient with neutronics/thermal-hydraulics coupled systems has been a highly demanding exercise because of the difficulty coupling with boron transport models. Within subproject 3 of the FP7 European Project NURISP, two neutron kinetics codes, COBAYA3 and DYN3D, coupled with the thermal-hydraulics code FLICA4 in the NURESIM platform were employed to simulate boron dilution transients. Three transients were defined in the project, involving increasing volumes of diluted water entering the core inlet, to test the adequacy of the coupling between the codes. The results obtained with COBAYA3/FLICA4 and DYN3D/FLICA4 couplings for the PWR boron dilution benchmark defined are presented. Additionally, results from the coupled codes DYN3D/FLOCAL are applied for further verification. The results verify the applicability of the implemented couplings to this type of problems, where peak powers reached can be very high during short periods after which the reactor stabilizes at a few per cent of the nominal power. Also generation of vapour is obtained in the simulations.