Nitrogen losses and chemical parameters during co-composting of solid wastes and liquid pig manure. Issue 16 (18th August 2018)

• Record Type: Journal Article
• Authors: Vázquez, M. A.; de la Varga, D.; Plana, R.; Soto, M.
• Is Part Of: Environmental technology. Volume 39:Issue 16(2018)
• Page Start: 2017
• Page End: 2029
• Publication Date: 2018-08-18
• Subjects: Pig liquid manure -- solid manure -- co-composting -- nitrogen losses -- heavy metals; Environmental engineering -- Periodicals; Environmental protection -- Periodicals; 628.05
• DOI: 10.1080/09593330.2017.1347717
• Languages: English
• ISSNs: 0959-3330

Abstract

ABSTRACT: The aim of this research was to study nitrogen losses during the treatment of the liquid fraction (LF) of pig manure by co-composting and to establish the best conditions for compost production with higher nitrogen and low heavy metal contents. Windrows were constituted with the solid fraction (SF) of pig manure, different organic waste (SF of pig manure, sawdust and grape bagasse) as co-substrate and Populus spp. wood chips as bulking material and watered intensely with the LF. Results show that nitrogen losses ranged from 30% to 66% of initial nitrogen and were mainly governed by substrate to bulking mass ratio and liquid fraction to substrate (LF/S) ratio, and only secondarily by operational parameters. Nitrogen losses decreased from 55–65% at low LF/S ratios (1.7–1.9 m 3 /t total solids (TS)) to 30–39% at high LF/S ratios (4.4–4.7 m 3 /t TS). Therefore, integrating the LF in the composting process at high LF/S ratios favoured nitrogen recovery and conservation. Nitrogen in the fine fraction (ranging from 27% to 48% of initial nitrogen) was governed by operational parameters, namely pH and temperature. Final compost showed low content in most heavy metals, but Zn was higher than the limits for compost use in agriculture. Zn content in the obtained compost varied from 1863 to 3269 mg/kg dm, depending on several factors. The options for obtaining better quality composts from the LF of pig manure are selecting co-substrates with low heavy metal content and using them instead of the SF of pig manure.