Development of an organ‐specific insert phantom generated using a 3D printer for investigations of cardiac computed tomography protocols. Issue 3 (30th April 2018)

• Record Type: Journal Article
• Authors: Abdullah, Kamarul A.; McEntee, Mark F.; Reed, Warren; Kench, Peter L.
• Is Part Of: Journal of medical radiation sciences. Volume 65:Issue 3(2018:Sep.)
• Page Start: 175
• Page End: 183
• Publication Date: 2018-04-30
• Subjects: 3D printing -- cardiac insert phantom -- computed tomography -- computer aided design (CAD) -- rapid prototyping; Radiology, Medical -- Periodicals; Radiology, Medical -- Australia -- Periodicals; Radiology, Medical -- New Zealand -- Periodicals; Radiotherapy -- Periodicals; Diagnostic imaging -- Periodicals; 616
• DOI: 10.1002/jmrs.279
• Languages: English
• ISSNs: 2051-3895

Abstract

Abstract: Introduction: An ideal organ‐specific insert phantom should be able to simulate the anatomical features with appropriate appearances in the resultant computed tomography (CT) images. This study investigated a 3D printing technology to develop a novel and cost‐effective cardiac insert phantom derived from volumetric CT image datasets of anthropomorphic chest phantom. Methods: Cardiac insert volumes were segmented from CT image datasets, derived from an anthropomorphic chest phantom of Lungman N‐01 (Kyoto Kagaku, Japan). These segmented datasets were converted to a virtual 3D‐isosurface of heart‐shaped shell, while two other removable inserts were included using computer‐aided design (CAD) software program. This newly designed cardiac insert phantom was later printed by using a fused deposition modelling (FDM) process via a Creatbot DM Plus 3D printer. Then, several selected filling materials, such as contrast media, oil, water and jelly, were loaded into designated spaces in the 3D‐printed phantom. The 3D‐printed cardiac insert phantom was positioned within the anthropomorphic chest phantom and 30 repeated CT acquisitions performed using a multi‐detector scanner at 120‐kVp tube potential. Attenuation (Hounsfield Unit, HU) values were measured and compared to the image datasets of real‐patient and Catphan ® 500 phantom. Results: The output of the 3D‐printed cardiac insert phantom was a solid acrylic plastic material, which was strong, light in weight and cost‐effective. HU values of the filling materials were comparable to the image datasets of real‐patient and Catphan ® 500 phantom. Conclusions: A novel and cost‐effective cardiac insert phantom for anthropomorphic chest phantom was developed using volumetric CT image datasets with a 3D printer. Hence, this suggested the printing methodology could be applied to generate other phantoms for CT imaging studies. Abstract : This article outlines the utility of 3D printing technology to develop a phantom that can be used in computed tomography imaging studies. The output was compared to patient and CT phantom images to determine its similarity. This study is a part of the main research project which was to optimise computed tomography protocols by using the iterative reconstruction algorithm.