A dynamic load estimation method for nonlinear structures with unscented Kalman filter. (15th February 2018)

• Record Type: Journal Article
• Authors: Guo, L.N.; Ding, Y.; Wang, Z.; Xu, G.S.; Wu, B.
• Is Part Of: Mechanical systems and signal processing. Volume 101(2018)
• Page Start: 254
• Page End: 273
• Publication Date: 2018-02-15
• Subjects: Force identification -- Unscented Kalman filter -- Nonlinear structures -- Isolated structure -- Real-time substructure test -- Shaking table test; Structural dynamics -- Periodicals; Vibration -- Periodicals; Constructions -- Dynamique -- Périodiques; Vibration -- Périodiques; Structural dynamics; Vibration; Periodicals; 621
• DOI: 10.1016/j.ymssp.2017.07.047
• Languages: English
• ISSNs: 0888-3270

Abstract

Highlights: A force identification method with unscented Kalman filter (UKF) for nonlinear structure is proposed. The UKF is improved with SVD and applied in the identification. A real-time substructure test and shaking table test are studied for the validation of the proposed method. Model error, measurement noise and unexpected disturbances are considered in the process of identification. Abstract: A force estimation method is proposed for hysteretic nonlinear structures. The equation of motion for the nonlinear structure is represented in state space and the state variable is augmented by the unknown the time history of external force. Unscented Kalman filter (UKF) is improved for the force identification in state space considering the ill-condition characteristic in the computation of square roots for the covariance matrix. The proposed method is firstly validated by a numerical simulation study of a 3-storey nonlinear hysteretic frame excited by periodic force. Each storey is supposed to follow a nonlinear hysteretic model. The external force is identified and the measurement noise is considered in this case. Then a case of a seismically isolated building subjected to earthquake excitation and impact force is studied. The isolation layer performs nonlinearly during the earthquake excitation. Impact force between the seismically isolated structure and the retaining wall is estimated with the proposed method. Uncertainties such as measurement noise, model error in storey stiffness and unexpected environmental disturbances are considered. A real-time substructure testing of an isolated structure is conducted to verify the proposed method. In the experimental study, the linear main structure is taken as numerical substructure while the one of the isolations with additional mass is taken as the nonlinear physical substructure. The force applied by the actuator on the physical substructure is identified and compared with the measured value from the force transducer. The method proposed in this paper is also validated by shaking table test of a seismically isolated steel frame. The acceleration of the ground motion as the unknowns is identified by the proposed method. Results from both numerical simulation and experimental studies indicate that the UKF based force identification method can be used to identify external excitations effectively for the nonlinear structure with accurate results even with measurement noise, model error and environmental disturbances.