Evaluation of Direct Drive Capsule Fill-Tube Assembly Survivability in Support of the 100 GBar Campaign. (17th February 2018)

• Record Type: Journal Article
• Authors: Carlson, L. C.; Fitzsimmons, P.; Pajoom, S.; Petzoldt, R.; Tambazidis, A.; Harding, D.; Chapman, R.; Ulreich, J.; Wittman, M.
• Is Part Of: Fusion science and technology. Volume 73:Number 2(2018)
• Page Start: 107
• Page End: 118
• Publication Date: 2018-02-17
• Subjects: Capsule fill-tube assembly -- 100 GBar -- direct drive; Fusion reactors -- Periodicals; Nuclear fusion -- Periodicals; Fusion reactors; Nuclear fusion; Periodicals; 621.48405
• DOI: 10.1080/15361055.2017.1406240
• Languages: English
• ISSNs: 1536-1055

Abstract

Abstract: Capsule fill-tube target assemblies (CFTAs) for direct drive have been demonstrated in the past for Laboratory for Laser Energetics (LLE) cryogenic layering studies, evolving and building upon successful deliveries for the National Ignition Facility [Saito et al., Fusion Sci. Tech., Vol. 55, p. 337 (2009); Johal et al., Fusion Sci. Tech., Vol. 55, p. 331 (2009); Saito et al., Fusion Sci. Tech., Vol. 59, p. 271 (2011); Moreno et al., Fusion Sci. Tech., Vol. 59, p. 46 (2011); and Rice et al., High Power Laser Sci. Eng., Vol. 5, p. 7 (2017)]. The current 100 Gigabar (GBar) Campaign requires tighter specifications over prior CFTA work in terms of robustness and reduced fill-tube diameter and glue spot size, which impact the survivability of the CFTA. To tackle these challenges, General Atomics and LLE are developing a direct-drive CFTA that survives all fabrication activities, from assembly and qualification testing to transport, cryogenic layering, and target chamber insertion at the Omega Laser Facility. Fifty-five CFTAs of three main designs have been constructed and tested to date, building off the current LLE cryogenic layering study of CFTA design (typically 870-μm-diameter × 25-μm-thick wall capsule). Variations of glass fill tube sizes ranged from 30, 20, and 10 µm in diameter. Testing protocols were developed to enable comparison of different designs against one another and to evaluate their robustness at room temperature. The testing protocols include leak checks, resonant vibration mode identification, and vibration survival testing against a power spectral density input. This paper compares the different design trade-offs, measurements, and results including room temperature survivability, ringdown response, leak tests, and scanning electron microscope images taken of failed fill tubes and glue joints. A design recommendation is put forth meeting the design constraints, which consists of a polymicro-composite tube and 10-µm fill tube, ensuring survivability at cryogenic temperature, a higher first-resonance mode, and smaller fuel volume.