Fatigue crack growth and fracture behavior of as-cast Ti-43.5Al-4Nb-1Mo-0.1B (TNM) compared to Ti-48Al-2Nb-2Cr (4822). (December 2017)

• Record Type: Journal Article
• Authors: Dahar, Matthew S.; Tamirisakandala, Sesh A.; Lewandowski, John J.
• Is Part Of: Intermetallics. Volume 91(2017)
• Page Start: 158
• Page End: 168
• Publication Date: 2017-12
• Subjects: Intermetallic compounds -- Metallography -- Periodicals; Metallic glasses -- Periodicals; Composés intermétalliques -- Métallographie -- Périodiques; 669.94
• DOI: 10.1016/j.intermet.2017.08.015
• Languages: English
• ISSNs: 0966-9795

Abstract

Abstract: The effects of sample orientation and load ratio on the room-temperature fatigue crack growth and fracture behavior of a third-generation gamma titanium aluminide Ti-43.5Al-4Nb-1Mo-0.1B (TNM) were determined and compared with that of a second-generation alloy Ti-48Al-2Nb-2Cr (4822). Both materials are currently used as low pressure turbine blades in fuel-efficient gas turbine engines. Bend bar specimens, excised from the as-cast articles in the longitudinal and transverse directions to the casting direction, were tested at room temperature in lab air. Load ratios in the range 0.1–0.9 were used in fatigue testing to determine their effects on the fatigue threshold, Paris law slope, and stress intensity at overload in fatigue. Microscopy and fractography were used to document the effects of sample orientation on the fatigue crack path and morphology. Significant effects of changes in load ratio were observed on the fatigue threshold and Paris law slope, while effects of sample orientation were minimal for both alloys. The effects of microstructure length scale and differences in micro-constituents are discussed in relation to the properties measured. Highlights: Changes in load ratio, R, produced significant effects on fatigue crack growth. Fatigue thresholds showed a greater dependence on R compared to TiAl. Paris slope increased from 9 at R = 0.1 to over 90 at R = 0.9. Fatigue threshold, Paris slope, and Kmax at failure not affected by test orientation. Fatigue surfaces showed translamellar, interlamellar, and brittle fracture features.