Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling. (1st September 2018)

• Record Type: Journal Article
• Authors: Caminero, M.A.; Chacón, J.M.; García-Moreno, I.; Rodríguez, G.P.
• Is Part Of: Composites. Number 148(2018)
• Page Start: 93
• Page End: 103
• Publication Date: 2018-09-01
• Subjects: 3D printing -- Fused deposition modelling -- Continuous fibre reinforced thermoplastic composites -- Impact strength -- Failure analysis; Composite materials -- Periodicals; Materials science -- Periodicals; Composite materials; Periodicals; Electronic journals; 620.118
• DOI: 10.1016/j.compositesb.2018.04.054
• Languages: English
• ISSNs: 1359-8368

Abstract

Abstract: Fused deposition modelling (FDM) is a promising additive manufacturing technology and an alternative of conventional processes for the fabrication of fibre reinforced composites due to its ability to build functional parts having complex geometries. Continuous fibre reinforced thermoplastic composites (CFRTPCs) are becoming more significant in industrial applications due to their inherit advantages such as excellent mechanical performance, recycling and potential lightweight structures [1, 2]. However, a major concern affecting the efficient use of 3D printed composites is the effect of impact damage on the structural integrity, compared to conventional pre-preg composites. The aim of this study is to evaluate the effect of build orientation, layer thickness and fibre volume content on the impact performance of 3D printed continuous carbon, glass, and Kevlar ® fibre reinforced nylon composites, manufactured by FDM technique. Charpy impact tests are carried out to determine impact strength. SEM images of fractured surfaces are examined to assess failure mechanics of the different configurations. It is observed that the effect of layer thickness of nylon samples on the impact performance was different for flat and on-edge samples. Impact strength increases as layer thickness increases in flat samples but, conversely, it decreases in on-edge samples, depicting a more brittle fracture. In addition, the results show that impact strength increases as fibre volume content increases in most cases. Glass fibre reinforced samples exhibits the highest impact strength and carbon fibre reinforced samples the lowest one and similar to nylon performance. Furthermore, on-edge reinforced samples exhibit higher values of impact strength than flat reinforced samples. Finally, the results obtained demonstrate that impact strength exhibited by 3D printed composites are significantly higher than the usual 3D printed thermoplastics and, in some cases, even better than common pre-preg materials.