Characteristics of water-retaining porous ceramics with sandblasting waste. (30th December 2017)

• Record Type: Journal Article
• Authors: Ho, Chih-Husan; Lo, Huang-Mu; Lin, Kae-Long; Lan, Ju-Ying
• Is Part Of: Construction & building materials. Volume 157(2017)
• Page Start: 75
• Page End: 82
• Publication Date: 2017-12-30
• Subjects: Waste diatomite -- Sandblasting waste -- Porous ceramics -- Sintering -- Water retention; Building materials -- Periodicals; 624.18
• DOI: 10.1016/j.conbuildmat.2017.09.079
• Languages: English
• ISSNs: 0950-0618

Abstract

Highlights: WRPC samples favorable chemical properties and heat stability at high heating temperatures. WRPC samples could maintain a good water-retention performance for 10–15 h and better than foamed glass. WRPC samples exhibited excellent water-retention performance at various heating temperatures. Abstract: The study focuses on the characteristics of water-retention porous ceramics with sandblasting waste. Recycling of sandblasting waste collected from the surface treatment process in the solar industry. Sand blasting waste is mainly composed of Al2 O3, and also contains very small portion of silicon and SiC. Water-retaining porous ceramic (WRPC) samples, comprising waste diatomite and sandblasting waste, with excellent humidity control performance were prepared. The appearance and structural properties of the samples were investigated through analysis of water absorption and compressive strength, X-ray diffraction, and scanning electronic microscopy. Moreover, the water retention performance levels of the samples at various heating temperatures were investigated. The WRPC samples prepared at the heating temperature of 1, 270 °C meet the Standards for Japan Interlocking Block Pavement Engineering Association (compressive strength > 3 MPa, water absorption > 70%). At high heating temperatures, the quartz of the WRPC samples completely changed to cristobalite, thus affording the WRPC samples favorable chemical properties and heat stability. When the WRPC samples were sintered at high temperatures (1, 200–1, 270 °C), because of the driving force of sintering, the Scanning Electron Microscope (SEM) micrographs exhibited neck growth. The samples featured high compressive strength, low water absorption, and high water-retention performance. The results revealed that the WRPC samples could maintain a good water-retention performance for 10–15 h and better than in the foamed glass material (4 h). WRPC samples containing 5–20% sandblasting waste exhibited excellent water-retention performance at various heating temperatures.