Al2O3–Water nanofluid heat transfer and entropy generation in a ribbed channel with wavy wall in the presence of magnetic field. (3rd May 2018)

• Record Type: Journal Article
• Authors: Mayeli, Peyman; Hesami, Hanieh; Besharati-Foumani, Hossein; Niajalili, Mehdi
• Is Part Of: Numerical heat transfer. Volume 73:Number 9(2018)
• Page Start: 604
• Page End: 623
• Publication Date: 2018-05-03
• Subjects: Heat -- Transmission -- Measurement -- Periodicals; Mass transfer -- Measurement -- Periodicals; Numerical analysis -- Periodicals; 621.4022
• DOI: 10.1080/10407782.2018.1461494
• Languages: English
• ISSNs: 1040-7782

Abstract

Abstract: In this article, a parametric study is conducted to evaluate heat transfer enhancement in a ribbed channel containing Al2 O3 –Water nanofluid with wavy wall. The physical domain is under the influence of the magnetic field that creates a negative force against the working fluid to move. Nanofluid with higher temperature enters the cool ribbed duct and heat is exchanged along the walls of channel. The effects of the dominant parameters including number of the blocks, solid volume fractions of nanofluid, Hartmann number, Reynolds number, and different states of amplitude sine waves are numerically tested on the local and average Nusselt number, skin friction, and total entropy generation. Excellent agreement between present study and previous literature is observed. It is found that, an augmentation in magnetic field will result in higher values of both local and average Nusselt number accompanying with bigger values of skin friction and entropy generation. Computations illustrate that, increasing the solid volume fraction of the Al2 O3 nanoparticles will raise the Nusselt number and total entropy generation rate but its effect on the skin friction is negligible. Also, numerical results imply that increasing amplitude sine waves of the geometry has incremental effect on the Nusselt number and skin friction but its effect on the total entropy generation rate is not so clear. Moreover, by adding number of the used blocks in the presence of magnetic field, the local Nusselt number experiences more jumps but it does not increase the average Nusselt number, necessarily. In addition, using more blocks increases skin friction but it has a reverse effect on the total entropy generation rate.