Development of a hydrogen dual sensor for fuel cell applications. (28th June 2018)

• Record Type: Journal Article
• Authors: Leonardi, Salvatore Gianluca; Bonavita, Anna; Donato, Nicola; Neri, Giovanni
• Is Part Of: International journal of hydrogen energy. Volume 43:Number 26(2018)
• Page Start: 11896
• Page End: 11902
• Publication Date: 2018-06-28
• Subjects: Hydrogen -- Sensor -- Fuel cell; Hydrogen as fuel -- Periodicals; Hydrogène (Combustible) -- Périodiques; Hydrogen as fuel; Periodicals; 665.81
• DOI: 10.1016/j.ijhydene.2018.02.019
• Languages: English
• ISSNs: 0360-3199

Abstract

Abstract: The development and application of a hydrogen dual sensor (HDS) for the application in the fuel cell (FC) field, is reported. The dual sensing device is based on a ceramic platform head with a semiconducting metal oxide layer (MOx) printed on Pt interdigitated contacts on one side and a Pt serpentine resistance on the back side. MOx layer acts as a conductometric (resistive) gas sensor, allowing to detect low H2 concentrations in air with high sensitivity and fast response, making it suitable as a leak hydrogen sensor. The proposed Co-doped SnO2 layer shows high sensitivity to hydrogen (R0 /R = 90, for 2000 ppm of H2 ) at 250 °C in air, and with fast response (<3 s). Pt resistance serves as a thermal conductivity sensor, and can used to monitor the whole range of hydrogen concentration (0–100%) in the fuel cell feed line with short response-recovery times, lower than 13 s and 14 s, respectively. The effect of the main functional parameters on the sensor response have been evaluated by bench tests. The results demonstrate that the dual sensor, in spite of its simplicity and cheapness, is promising for application in safety and efficiency control systems for FC power source. Highlights: A hydrogen dual sensor (HDS) for the application in the fuel cell (FC) field was developed. The main functional parameters on the sensor response have been evaluated by bench tests. HDS shows high sensitivity to H2 (R0 /R = 90, for 2000 ppm of H2 ) and fast response (<3 s). HDS monitor whole range of H2 conc. (0–100%) in FC feed line with fast response (<13 s). HDS is simple, cheaper and is promising for application in safety and efficiency control systems for FC.